what will fit this pellet into the mag? fx dream-whichever. i don't think so , the vulcan? uragan? hatsan - yes. guess i'm just curious if they work in the vulcan 2 / uragan mag.
30 cal polymag
- Thread starter rangur1
- Start date
They will not fit the vulcan/uragan mags. The 25 polymags fit the dreamtac mags perfectly I dont know about the 30's.
Upvote 0
If you're into a little hassle for a lot of reward clip just enough of the tip with a nail clippers so they'll fit the mag. DON'T pull the tip out. Clipping the tip doesn't affect the aerodynamics the way pulling out the tip does. Been doing it for years with great success!
Upvote 0
The Hercules Bully mags from hatsan seem to be designed around the polymags as they are really wide, and the PM’s fit perfect and do not affect cycling of the mag not one bit.
The FX Wildcat mags, well, not so good on the PM’s. I found as I tried them, that I was clipping off too much of the red tip to even call it a polymags anymore. It was more like I’m shooting Crow Magnums now. On the rare occasion I did ha e some red tip left, the magazines got stuck and the cycling was hit and miss.
The FX Wildcat mags, well, not so good on the PM’s. I found as I tried them, that I was clipping off too much of the red tip to even call it a polymags anymore. It was more like I’m shooting Crow Magnums now. On the rare occasion I did ha e some red tip left, the magazines got stuck and the cycling was hit and miss.
Upvote 0
Based on recommendations from guys on this site, I pull out the entire tip to fit a Wildcat 0.30. I’m shooting at close range, pesting at around 20-30 yards, but they seem to work great. Different POI than a diablo but repeatable and hard hitting. I have noticed needing less follow-up shots on raccoons than with the diablos.
Upvote 0
Pulling the tips have a huge effect on accuracy. Dog nail clippers to clip the tips or I've heard butane mini torches to melt the tips down?
It would be nice if they would make shorter pellets, all my guns like polymags, they just don't fit magazines
It would be nice if they would make shorter pellets, all my guns like polymags, they just don't fit magazines
Upvote 0
Exactly you would think after all these years these manufacturer's would accommodate for the 30 polymags. too much like right
Upvote 0