I have just finished making a test model for a well known big bore maker with a 3 inch diameter, please do not ask, I will NOT be making any more. But I thought I would share this result with the members of AGN because I was totally surprised by it. Just for kicks I tried the huge can on my 22 caliber Sumatra and Career, both are extremely loud air guns, my expectations were to still get a fair pop from it because of the very large bore hole, absolutely nothing, on both guns all I could hear was the hammer hitting the valve, I was totally surprised by this having such a large bore hole and no pellet being fired. I thought I would share this with those of you who like the large cans, this is about as large as they get, now I need to wait for the feedback on how it works on the 45 caliber gun it was made for, Neil.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
3 inch diameter Moderator
- Thread starter NeilClague
- Start date
Wow 3" I'd market it as the VoluMonster.
That's 7 cubic inches of volume per inch of axial length. How long is it?
That's 7 cubic inches of volume per inch of axial length. How long is it?
Upvote 0
It was 12 inches long, but you are right 3 inches in OD is a monster, it was done more for the challenge than anything else and to see how it would work on the big bores. Machining the solid stock to lighten it up as much as possible was real tedious, shorter ones would not be too heavy but I am not going to get into making them in this diameter, for anything other than a high powered big bore it is really huge over kill, Neil.
Upvote 0