2nd Gen Benjamin Marauder Gauge Assembly Stuck

[tommygunz88]

Hey everybody, I don't post much but in need of some help.

I ordered a new gauge and thought that would fix my leak but it didn't. It leaks from 2000 psi to 1000 psi or below in a hour. I sprayed the gun with soapy water but cant seem to find any leaks oddly... You would think with that big of a leak I would be able to find it. So I decided to get on youtube. Found this video and found out that I have the same crud around those seals after looking at it. The guy in the video seems to be able to hook the part with the hanger and easily remove the gauge assembly. Mine seems to be stuck. Am I missing a step or is the process different on the 2nd gen's?

Thanks,
Tommy

 

[nomobux]

If you have the gauge and all screws out, it should pull out. When I did mine, I had the gun all apart and pushed everything with a piece of pvc pipe.

 

[tommygunz88]

Thankyou for the reply. It was just a bunch of crap around it making it harder to get out. I used the pvc and pushed harder and it came out. I was able to successfully replace all seals and clean parts up. Gun is back together now and now holding pressure.