"Hepotter"
Yes!"plantman"Hepotter do you have any pictures of your bipod on the gun or your ldc?
"pretbek"LDC is from [email protected] The last I heard, he was selling his carbon fiber ldc’s for $100 each. He stands behind his gear and it works.The ldc adapter is from John Hagan. His email is Hagantool.com
Just some corrections, if I may:
[email protected] is Donny's email.
[email protected] is John's email, he doesn't have a website.
Sorry got confused. I edited my post hope this didn't cause any trouble."spysir""300 bar which is 3600 psi"
300bar (1 bar being about 14.5psi) would be around 4,350psi which might be a bit much.
John
"bornkiller"I found out a guy is making custom baffles for the Vulcan
peter at top gun has them they just replace the internals and are designed after the collibri I spoke to him I'm getting mine already done up so he says it will be back yard friendly I also bought john Hagen end cap and a Donny du Ldc I can't wait my Vulcan will be here next wk from everything I'm reading the Vulcan is the it!!
i'm pretty sure it is i used a tool for taking off E-clips and it slipped and put a nice shiny scratch on the cap easily fixed with a black sharpy though. I'm going to have to find someone that makes a tool or make one myself or if somebody on here has some ideas please share."AJ3"Hepotter
Is the Vulcan shroud end cap difficult to remove? Just curious if it is bonded in any way and what type of tool to spin it off?
Thanks much
AJ3Is the shroud itself pretty easy to remove? I know the manual just says unscrew it but things seem to never work that simple for me. Any tips appreciated?
Unscrew it, pull it up till the base hits the threaded barrel end, wiggle it a bit while pulling, and off it comes. Simple."AJ3"Hepotter
Is the Vulcan shroud end cap difficult to remove? Just curious if it is bonded in any way and what type of tool to spin it off?
Thanks much
Tool = [email protected]"KYAirgunner"
i'm pretty sure it is i used a tool for taking off E-clips and it slipped and put a nice shiny scratch on the cap easily fixed with a black sharpy though. I'm going to have to find someone that makes a tool or make one myself or if somebody on here has some ideas please share."AJ3"Hepotter
Is the Vulcan shroud end cap difficult to remove? Just curious if it is bonded in any way and what type of tool to spin it off?
Thanks much
Hey Hepotter where did you get the tool to adjust your hammer spring?