I actually like the longer barrel on the MK3. But I sure wish it came with a walnut stock. Yours just looks richer. I have to admit for being a plastic stock it does have a nice feel. Sorry, plastic sounds cheep. But by any other name it’s what it is. It just doesn’t have the same appeal as wood. That’s just my likings, which don’t mean squat!
I noticed that on your chrony report you have 8 shots, How many shots are you getting from each with the different plenums? I have a Mark I in .25 with a Huma and I have the Power Plenum (not installed) as well and shoot Prairie Dogs each year. I would like more shots and, was hoping it would just make it more efficient but worry that I will loose too much volume. Been looking at the Rowe Power Plenum.
Thanks
Thanks Joe for the link on the barrel band. It arrived today. Spent my lunch hour peeling the carbon fiber wrap off my barrel so it would slip on. Re-sighted in at 50. The band must raise the barrel just a tad as it was hitting 3” high at 50 yards. All is good now.
Fully agree Joe ! I have menawhile installed a huma reg , dual transfer port and a huma reg gauge. Nice cocking handle and some other wannahaves on my WC MK3 .22 shooting the 20.2 grain nsa’s at 950 fps. likea laser. Currently waiting for a nice custom wood stock offer from Gunnar !
wildcat rules here because of its estethics and basic simplicity of setting once and forgetting about settings after and just aim and shoot.
by the way also just swapped my Delta titanium 2.5-15x56 for a Sightron 3-16x42 first focal plane ! As with the slugs distances over 50 yards are reality with high precision potential I have digged into MOA dots use of a scope and there the Sightron ticks many of boxes for me.
did you do any changes on your WC rifles lately ?
My Mk3 sniper wont get those kinda speeds to save a life. Going to have to get the 2.5 plenum. Im only getting 820 fps with JSBs mk2 redesigned 33.95. Benjamin 28 grains about 870 . Im using the heavy slug barrel. Hammer is maxed and reg is 150 bar.