I'm I the only one with trouble loading 25 cal JSB Kings/Heavy/heavy MarkII loading in my 25 cal Crown mag. First couple loads ok but about half way through you have to have something to push them in. They do not feed without having to tap on mag. No trouble with any JSB's in my WildCat or Impact, What UP, HELP Please
25 Crown mag
- Thread starter kk4iz
- Start date
I'm good with mine. I do tap them down to make sure they are all aligned prior to putting the mag in
Upvote 0
Was told it was not my mag just use the 25 grn but i have problem with them also. Just don't have time to shoot as much as I would like. I was called back to work after almost 2 years of retirement. Will try them again to see it they will repair or replace.
Upvote 0
Mine jammed up on me once, But that was in the first couple days of having the gun. Otherwise no issues here either. Warranty issue??
Sorry for your troubles!
Sorry for your troubles!
Upvote 0
I had the same problem on my Impact. It turns out the inner carousel is out of round. I had to take some material off the inside of the magazine outer case to get the MKI and MKII ammo to load and the magazine to function properly. I have read about others with he same problem. Sounds like they are having the same issue with Crown magazines. You would think there would be better QC on a $80 magazine.
Upvote 0
Same trouble with Impact mags! I`ve bought the new mag kit. Easy to load and shoot. Of course that doesnt help Crown
Upvote 0
I used to have the same problem on my .25 crown mag, i belive like some one said that not all the holes are the same size and by the middle i have to use a pen or somethig to push the pellets in. And also have a .30 mag and no problems with that one.
Upvote 0
Take a look at this link with my fix. It fixed this issue on my mag and it works perfectly.
Crusher
Crown Magazine Issues Fixed[/QUOTE]https://www.airgunnation.com/topic/crown-magazine-issues-fixed/embed/#?secret=i4r5sGzxuq
Crusher
Crown Magazine Issues Fixed[/QUOTE]https://www.airgunnation.com/topic/crown-magazine-issues-fixed/embed/#?secret=i4r5sGzxuq
Upvote 0
Hi
I do not have a dremel and am not prepared to ruin several magazines in learning how to make it work.
Been in touch with dealer because my mag will not load mk2's at all, push as hard as you like. It jams at about holder 7. Dealer sent me another , even worse than original.I await to see what happens next.
yours unhappy and furious
I do not have a dremel and am not prepared to ruin several magazines in learning how to make it work.
Been in touch with dealer because my mag will not load mk2's at all, push as hard as you like. It jams at about holder 7. Dealer sent me another , even worse than original.I await to see what happens next.
yours unhappy and furious
Upvote 0