6 weeks old, been shooting great until a couple of days ago after sitting all night I noticed that the bottle gauge and the regulator gauge had equalized at 220 bar. I removed the bottle, degassed it, turned regulater screw all the way in and installed the bottle. Slowly turned out screw to 140 bar and started shooting. After two days and three magazines and a fill the gauge is dead on at 140 bar. What happened? Any damage? Seems to be working great.
.25 Crown—-HEIP
- Thread starter RBAZ
- Start date
I haven’t had that problem with mine but I had heard that there is a problem with the regulator in the Crown as being a reason for them not being as available as they could be.
http://www.airgunnation.com/topic/fx-crown-regulator-updates/
http://www.airgunnation.com/topic/fx-crown-regulator-updates/
Upvote 0
bummer mine is on the way..I will be sure to not to have any pressure left after I finish shooting..I don't want trouble.
thanks for posting.
thanks for posting.
Upvote 0
been reading someweres theres been a few bug but our guy IS ON IT who else would you want iron things out than EARNEST
Upvote 0
Sounds like the belville stack or valve was stuck then popped back, I wouldn't worry about it, just keep shooting.
Upvote 0