.25 Casted Slugs in Slug Liner A 700mm.

[Guest]

I’m wanting to cast .25 slugs for my Taipan Vet Long. The gun is equipped with a 700mm FX STX barrel system with a Slug Liner A liner. Currently it is tuned to shoot the 34gr JSBs at 905. Can be turned up if necessary. Can anyone point me in the right direction for a mold? I have some 34gr NSA slugs on the way, but I do enjoy casting my own.

 

[triggertreat]

I’m wanting to cast .25 slugs for my Taipan Vet Long. The gun is equipped with a 700mm FX STX barrel system with a Slug Liner A liner. Currently it is tuned to shoot the 34gr JSBs at 905. Can be turned up if necessary. Can anyone point me in the right direction for a mold? I have some 34gr NSA slugs on the way, but I do enjoy casting my own.

I buy my molds from NOE: https://noebulletmolds.com/site/

This is the mold (the 4-cavity aluminum model) that I am casting for my .25 with the Superior liner. Would probably work as good, or maybe better with the slug A.

https://noebulletmolds.com/site/product-category/251/249-39-rf-e6

I just came in from shooting dried up tangerines at 75 yards. Unbelievable smackdown with these slugs. Those tangerines are literally exploding at 75 yards with these. The FX Hybrids fit the mold perfectly, but no hollow base of course, but sizing fixes that.