Hi All,
Received my new MK2 FX Crown today in .22.
600mm Superior liner and from the factory shoots the 25.4 Redesigned at 975 on max (on power 4 is shooting them at 900 and is an absolute laser)....
Reg is set at 135ish bar and internal hammer adjustment is a long way from being maxed out so tons of room to increase power for heavier slugs etc.
From the outside only noticable change is the front power wheel is now high, medium and low where as before was .30,.25 and .22,.177 followed by low....
Power is markedly increased where as my .22 Continuum to get the same power I am getting now with the 25.4 I would be up to 150 bar on the reg with the hammer spring maxed out with the 700mm barrel and would still be under the power level the MK2 is generating stock with a 600mm barrel....
Very pleased!
Stock is going to be off to DreamWeaver for a custom dip and a Kraford & Lypt butt stock installed and she is all set!
Stay Well All!
Dr. Mike
Received my new MK2 FX Crown today in .22.
600mm Superior liner and from the factory shoots the 25.4 Redesigned at 975 on max (on power 4 is shooting them at 900 and is an absolute laser)....
Reg is set at 135ish bar and internal hammer adjustment is a long way from being maxed out so tons of room to increase power for heavier slugs etc.
From the outside only noticable change is the front power wheel is now high, medium and low where as before was .30,.25 and .22,.177 followed by low....
Power is markedly increased where as my .22 Continuum to get the same power I am getting now with the 25.4 I would be up to 150 bar on the reg with the hammer spring maxed out with the 700mm barrel and would still be under the power level the MK2 is generating stock with a 600mm barrel....
Very pleased!
Stock is going to be off to DreamWeaver for a custom dip and a Kraford & Lypt butt stock installed and she is all set!
Stay Well All!
Dr. Mike