.22 Crosman Piranha

22 Gladius short with 14.3 grain Crosman Piranha

The gun with me shooting it is not tack driver but at the #4 and #5 power settings it was not even close to making a group.

When I turned the power down to #3 at about 130 bar it settled down some to at least hit in the same area

I shot a charge from 190 bar down at the #3 setting and it did better (if you can say that) after the power for lower.

671A8AA9-3663-460A-BCF2-95586AB2E4F3.1616798478.jpeg
EDB00C8C-7525-4B50-B90D-F626BB2777BC.1616798478.jpeg
2D3ED0CD-BB18-464A-A643-521C362A479E.1616798483.jpeg





 
I’ve read some horror stories about the Piranha but they were cheap so I figured I’d give them a try. Only shooting 30 yards.

The target is a homemade splatter burst. I usually use some thicker paper board but was glad to find some thinner paper worked fine. The bad news is the stick on dots came off but the black paint came off with it leaving a good aiming point. 

The first shot went way low left as I had the power on the S510 turned way down. 
At 190 bar the other nine did a lot better than what I was expecting, with most hitting the center dot. 


i shot some more groups and things didn’t go as well as I shot down to 110 bar. 
F2439B11-3B50-424D-952A-D7029D65F4F8.1616719590.jpeg
ACE0B99A-1C30-4642-9E5E-A9EABADF1BF5.1616719591.jpeg


 
That implication sorta what many early on naysayers said about the Alpha6 and Barra and double loading 2 pellet trick and yellow gas line Teflon tape trick on the not perfect wobbly Donny threads and yanking his power adjuster to get it back to normal and rubber mallet and just shoot the hell out it to fix itself and Alphabet org stop leak quick fix trick see what happened.
 
I never got them to shoot well in any of my guns at any speed.

Concur ..... All Over the place in every gun tried. There earlier attempt with the Destroyer or Destroyer EX was only slightly better.

IMO all 3 of these are near Point Blank range pellets lacking any degree of dependable accuracy for work much past 20 yards