Once again, excellent video! Thanks Nate. I just received mine just over a day ago. I like the rifle except mine is slightly different from the one you reviewed. Mine has 20" barrel from what I can measure ( I gotta have the 26" barrel). Mine has on the underside of the tube next to the regulator gauge, what seems to be an external adjustment thing for the regulator (although mine seems to be set really high. when I filled up to 180 bar, the reg pressure shows 180 bar as well. Maybe it'll go higher if I filled it up higher but I didn't because on the receiver it says "180 bar max fill pressure" and "tested to 250 bar in 2021 of January." The gun arrived with some defects: the buttstock pad has holes on top and bottom. Bottom of stock by the recoil pad, the stock has 3 little dents close to each other (no biggie, but along with the other defects; my confidence is down). The instruction/user manual must have been left somewhere in the shop because it didn't come with the package. The safety lever rubs against the bottom of the receiver when moving back on forth between safe and fire (minor but shouldn't be happening). I like how the revolver magazine fits tight in its place. I like the breech opening as it seems it would do a good job of lining up the pellet/slug in the same spot for every shot. As you mentioned, the barrel is screwed into the receiver tight (nice!) so barrel is on it stiff. Air tube is the perfect size. The receiver and everything metal fits in the stock tightly that leaves no play or movement so it's a tight and secure fit (while not being overly tight that would make disassembly a pain). The forend of the stock is a little thin on the sides for my liking and noticeably thinner on one side. But color and stain finish looks good considering how these finishes are generally on most guns (including powder burners). Wood grain is nice. I just wanted to share my first hand experience with handling and inspecting the product as I noticed, no other person but you Nate has reviewed this one (maybe not many have purchased this rifle - probably mainly because the reg pressure is non adjustable; but mine seems to be after seeing that "thing" under the air tube next to the reg pressure gauge - unless it's an air bleeder or degassing thing. But the thing looks a lot like and adjuster for reg pressure). Anyone else with helpful info or observations, please chime in. Thank you. Here are some pics......
View attachment 386806 View attachment 386807 View attachment 386808 View attachment 386809 View attachment 386810 View attachment 386811 View attachment 386812 View attachment 386813 View attachment 386817 View attachment 386818 View attachment 386819