1st PCP

[Fordcnc]

Little over a year ago I started noticing airgun performance on YouTube. It sparked up my interest in Airgun's again. 
So Monday I arrived at

Air Guns of Arizona to pickup me new FX IMPACT 25ca. Plus Atlas 5-H bipod, MTC VIPER PRO 5-30, big air bottle, targets and pellets. They were very helpful to a 1st timer. I appreciate everything. 

 

[Keyman62421]

you started right!!! saved your self a couple thousand!

 

[intenseaty22]

Congrats! Sounds like you jumped in straight into the deep end of the black hole. 

 

[Hotbrass]

Congratulations 

 

[scrane]

Good luck.

 

[Hynzie]

YOU WILL NEVER ESCAPE welcome pat

 

[FunGun]

Enjoy! You went straight to the top of the heap! Lots of things to tinker and experiment with on the the impact! You'll have a ball!

 

[Matt247365]

Nice going, Ford! Let us know how you like the bullpup configuration (I'm assuming this is your 1st bullpup)

Love my pups

Matt

 

[Fordcnc]

Thanks everyone. 
I'm having a problems with full load in the mags. 
For the first 6 to 7 pellets the drum not rotating.
I pulled them apart everything looked. 
I gave one extra turn preload on the rotary. 
That dropped the problem down to 3-4 pellets.
Any subjection 
using JSB EXACT KING HEAVY

 

[AirRanger]

That's not uncommon. When trying to shoot JSB Monster .177cal. 13.?g my mag won't index either. Try the MKll's, they seem to work better in certain mags. I think the bigger pellets won't work in the Impact mags because they were designed with tight tolerances to be able to hold a lot more pellets than most other airguns.

 

[ncrary]

I had the same problem. I used a Dremel tool with a sanding disk and slightly enlarged the case by removing some material on the inside edge. Now the mag will load and index all three JSB pellets.

 

[hawkeye69]

That's very disappointing for a gun in that price range, IMO.

 

[RuideCastro]

Indeed.good luck and many happy hours of shooting.
And yes I don´t give a DAMN, and I´ll keep my negative thoughts for MYSELF