Tuning .177 Weihrauch 95 Luxus tune

[bdzjlz]

Just finished tuning a 95 Luxus for a relative of a friend. Utilized a Vortek PG4 Steel HO kit and piston seal. This is a relatively new rifle that had lots of “buzz” but that was admittedly shooting well pre-tune. Was still able to cut group size by about 1/2.

Removed one coil from the spring kit.


Thought some of you might like to see the performance statistics so you can know what to expect. Trigger work completed as well. 

 

[Jlowe]

That is a very good HW95. I have seen very few that could break 800fps with a Baracuda in .177cal. Great report!

 

[Pea-shooter O.G.]

Fine work and shooting too! The FPE in that .177 is what my .22 HW95 is making. I tried the PG4 kit in mine and the cocking shoe was rubbing on the steel spring guide. The FPE was at 16.5. I ended up putting the ARH spring back in as the cocking force was lighter. 

Nice work. I think the owner should be happy!