.177 Fx breach o-ring

[nomojo65]

Impact M3 .177 breach o-ring size? Need one quickly, already have a full rebuild set coming but want more breach seals individually and would like to source some locally. Thanks in advance for information.

Joe

 

[5thumbs]

Try this. If your in a bind, LMK and I will send you a few. Good luck!

 

[cwcarrera]

You need "O-ring 4,3 x 1,5 NBR 70". That is 1.5mm cross section X 4.3mm ID in Buna N and 70 Durometer. There are excellent schematics on the FX USA website that will be very helpful for you in the future. Here are a couple of links.

https://fxairguns.com/wp-content/uploads/2021/04/F10370-Impact-M3-1.pdf

https://fxairguns.com/wp-content/uploads/2021/04/F10373-pipkit-impact.pdf

Enjoy!

 

[cwcarrera]

Guess I was typing too slow...

 

[nomojo65]

Thank you very much, I was stuck at work when I asked and didn’t want to take time to look it up and was hoping to see if I could match size and grab a few from work.