Search results for query: *

https://www.aliexpress.com/item/This-is-a-gift-free-of-mechanical-parts-the-link-is-used-for-customers-pay-the/32602913439.html?spm=2114.10010108.1000013.1.5EMraA&traffic_analysisId=recommend_2088_1_82199_new&scm=1007.13339.82199.0&pvid=24f0717b-8e8e-4d6d-995c-d71f67844578&tpp=1

615.62

615.62

615.62

615.62

615.62 

PM sent

I bought one. The gauge was off 300psi low The hose leaked The bleed would not seal. And it took 3 weeks to get it. Other than that it was great ... ;^) The worst part was all of the defects occurred over a couple of months. The gauge was bad, the vendor sent another, 3 weeks, it was...

261.56

615.62

312.45

Thanks Josparky. I made the bag myself. The handle is a slightly modified Scuba tank carrying handle. As far as the position of the filter goes, using it with a Shoebox, and the accompanying slow fill rate, I haven't seen any issues with moisture pooling or channeling. If your compressor...

The o rings I used were from an assortment pack. They were approximately 1 inch in diameter and 1/8 inch thick (or 25mm x 3mm).

Ok Guys, I am back with another update. After 12 hours of run time on the same set of beads, I took things apart tonight for a bead drying session. Opening the filter casing I was greeted with this view. The O-rings were showing signs of being compressed, and the filter was spotted in...

615.62

I do, this is about my setup: http://www.airgunnation.com/topic/high-side-chinese-filter-dryer-hack/

Hi Bizill Yes, there is about a 1/16" gap around the PVC in my set up as well. And I do agree with your logic that it could create a situation where the PVC could expand to some degree and even crack. I can say that has not happened to mine so far, and I don't think it will, and here is why...

Hi John. In addition to tracking the output performance, it can also help you track maintenance, like lube and filter changes. It only takes a minute or two to write down the info, and can save you some trouble. Thanks Rod

The value of keeping the compressor log was affirmed last week. On the 5th, I did a short run to top off my 44CF bottle from 3900, and I noticed that things seemed to be moving slower than normal. I stopped the run at 4300psi and entered the run's data into the spreadsheet...

Thanks Rajod We are in agreement regarding the slower output being an advantage in dwell time. If you consider the relatively low volume displaced by the third stage piston which is 1/8" in diameter, it will take some time to output enough volume to move air through the length of the filter...