Search results for query: *

Australian warranty states "I am entitled to a replacement rifle".

I do have a hone, but the cylinder should be linished in the process before assembly. Two HW100, Two RTI P3, One Daystate………..this is the only system with two vent holes in the HPA cylinder that I know of. Question: The gauge on this rifle appears to be connected to the plennum, down stream...

Correct Terry. So far, the reply from AA is; "Try fixing it yourself, sorry for the inconvenience". Lifetime in UK; 3 weeks in Australia. The least they can do is send me a set of Orings, in the case that I can satisfactorily remove the burr. Consumer laws are relatively strong here, so...

Why I query the Oring composition, RTI Arms has 3 Orings at NBR90, the rest NBR70. 300bar bottle, up to 180bar past the Reg. It’s all to do with the groove/squish design. Just a question in case there has been further advice in this regard. First string testing he rifle on the 5 powers. For a...

I hear you Martin.

Did you use NBR70, instead of 90? The Regulator housing is sealed inside the cylinder air space, and I question the need for NBR90 for this Oring. Trying to punch the housing into the breach may be why the Oring got damaged...... in factory fitment, and also when I used silicone grease to get...

Thanks trucker, it needed heat to get the cylinder loose. there is a tiny burr inside the tube vent close to the breach. it chewed the O ring when I unscrewed the tube. I replaced all of the O rings, but noticed the O ring that seals the Reg Housing into the breach had been damaged on factory...

Thanks trucker, it needed heat to get the cylinder loose. there is a tiny burr inside the tube vent close to the breach. it chewed the O ring when I unscrewed the tube. I replaced all of the O rings, but noticed the O ring that seals the Reg Housing into the breach had been damaged on factory...

I have just found the same leak. How did you release the air cylinder........it's not hand tight on O rings. Is the thread glued? need heat?