Search results for query: *

Probably "power factor" effect at play and they sized things for average power instead of peak in the compression cycle. My supply was 40 amps, I linked a cheap 50 amp, beyond that its more than extra dollar or two.

No. I need to read more. Maybe want to drop the fps in the future but 22gr pellets didnt need any scope adjustments when i zeroed with 14.3gr at 17 yards, both hit same dime hole.

Measure it but its probably a 3/8" hose and theres very few pumps to choose from. Sometimes they list it as 0.3 inch.

Box says Snowpeak, the fine print on the rifle mentions Lancer. I'd assume its the same as the Remington except without the narrow transfer port. I only mess with the triggers for now. I dunno, theres a grub screw. I havent checked if its for anti rotation or holding it on.

Argh, in the two hours I spent packing the car, forgot to bring the soldiers. Luckily had a stack of these 3d print targets. The big ones are dime size.

Lancer T-rex bullpup: $211 3-9x scope: 23$ Cheap bipod: $20 Hand pump: $50 Total: $314 Add $500+ for eletric pump, good filter and basic tank.

I printed your first link and they worked good. Umarex Gauntlet mags do not fit. Looking down the barrel the T-rex mags have a curved cutout on the left for the bullpup bolt linkage.

500 rounds through it. Crosman 14.3 domed With a wobbly table I was able to consistently hit pennies at 50 feet with a 9x scope (4.5moa). Gets mildly concerning loud having ear so close to chamber, I would want to wear an earplug in right ear for future target sessions just because it is...

FWIW, the 3/8x24 standard labeled discs are loose when threading but didnt wiggle or leak when tightened. You sacrifice 0.5mm of thread width however. I didnt want it to fly out so I went back to 10mm style disca.

Something like this and cut the ends off your existing cables to reuse them. https://www.amazon.com/Hosyond-Universal-Regulated-Switching-Transformer/dp/B0CQK57GP9

lol. The GXE EK2 amazon description. This is an $1800 compressor. China is determined to push iffy 10mm burst discs, industry standards be damned. Anyone have a clue on the math on doubling a burst disc?

Sounds like dead power supply, mine runs hot as hell. These things tend to use the XT60 plug and usually include a 12v battery clip, id try that. Its a $20 cheap switching power supply that gets hot. Often they have a minimum load requirement or else they tesla coil themselves to death. If I...

Thank you, printing them up now.

Bam, alien targets.

Paper over dollar foam.Headshot challenge.

20m target making. watered down white glue, dirt,.dollar store 2x3 foamboard. needs more painting.

Trying to buy or 3d print T-Rex (bullpup) magazines since I lost mine. All the vendors I find are overseas and want $90 for one when its a $20 item. Found a $15 3d print model but the instructions for the spring are in spanish and the two words "something wire" and the xyz dimensions and the...

I wanted to swap burst discs for a better brand. Do any of you have chinese compressors that you fill to 4500 reliably? I figured id just buy that brands disc and holder. Mine blows from 3500 to sometimes 4200. Almost out of discs and its a weird size I need to get overseas. Also, not sure why...

For scuba they said it wouldnt even slow down as it flies theough a car door. 3 tons at 60 mph energy for a ~7l tank. Brakes are magic. Tank so I just have to babysit compressor once.

Maybe because of the moderator laws in your state. Its full of removable baffles. They look as if you shot through a stack of nickles backwards.