Search results for query: *

IN

Good luck everyone

3141.30

3014.13

3141.31

314.13

Jaydog,The new .177 monsters should have a higher BC,in my testing in .22cal the old monsters had a BC of .036 at 40 yards and the redesigned monster have a BC of .042 at same distance so the design difference is significant in downrange energy for .22 I can only speculate that it will be...

What was it shooting the cpum at before and after the mods? Maybe a stronger hammer spring will work better than shims?

I don't think I'll ever be lucky enough to even pick up and hold a FX rifle let alone own and shoot one,I can't even afford to upgrade from a $200 maximus, guess that's the best I'll ever get but it serves my purposes well I suppose. Good luck everyone and congrats to whoever the lucky winner of...

$1314.13

Jsb exact 8.44gr, H&N Field target trophies, Crosman premier domed(boxed)7.9 or 10.5gr, and rws Superdome are a great start. Others will probably chime in with similar suggestions but please trust me,stay away from gamo ammo! All of them. The only good ones I've ever found are red fire and...

I think the only downside to the streamline (and all FX) is that you can only shoot JSB accurately,I'm starting not to trust JSB with all the bad batches I've got lately. At least with the MRod you have options with ammo choice.

I was able to just tap mine off with a piece of wood against the brake,and hit it with another piece of wood and off it came. I removed mine to add baffles to the inside. Very easy

I believe that maybe that shroud could be causing the flyers,I've seen JSB perform great at above 920fps and that one was shooting 880s with the 100 group. The shroud looked off center so maybe the air flow was disrupting the pellet enough to cause flyers? If I was lucky enough to win the kral,I...

314.13

I believe only the gas spring in the 85,87,125,135,155 along with edge series have adjustable gas piston,my friend has a 95 and 100x that I've helped tuned for him and those had sealed Rams that I couldn't figure out,the end cap had been attached to the ram with a screw in the fill port? But...

It's just a striker edge.25 that I bought a striker 1000 wood stock for and put it on for $30. Considering the wood striker 1000x cost $200 and I paid $89 for the edge and $30 for the stock,total I paid $119 for a $200 gun. 

Believe it or not the Benjamin Maximus has a hammer that is under no spring tension until you cock the bolt,just like the FX hammer system,you can hear the hammer sliding back and forth ever so slightly when you shake the rifle. I think That contributes to a very low extreme spread,and maybe a...

I stopped at 150 as noted on Benjamin hand pump,the 150 gave me 3 ft lb more than the stock 20 ,23ft lbs max now and 50 lbs of cocking effort up from 35 lbs. I also honed, vortek piston seal, button the Piston, smooth edges,ect that alone could have gave me the power boost? It says right on the...

I thought PA does not sell JSB with the lot/die#/head size sticker? I've always got the white sticker back from PA every time I order JSBs