Search results for query: *

I can make you one if you send me the parts in the pic. Will loose the spring and pickup some fps

I tether all of my AF guns. I usually get no more then 5 fps. Most of the time it's less then 3. I have 257, 308, 338, 375, 45 and 50. If your getting wide spreads it's the firing consistency. Took 2 shots last night with the 50 with 400 gr and it was 939, 938. Thats 3500 psi with 29"...

Exactly Been saying it for years that 4500 psi is not and will never be practical. How do you expect to fill your tank to 5500 psi? Most compressors only go to 5000 psi. 

If you know how to do it you don't need a wrench. Never used one. Never have a issue 

The gold reg is just something Joe B assembles and sells. Here is where you can buy it for best price. https://www.augustindustries.com/product-category/compressor-regulators/ This is by far the best and most consistent setup to tether for target shooting. I have had one for 9 years and...

Then your doing something wrong. Every gun I build I setup to shoot bore size slugs. My 257 shoots 257 sized slugs. I can shoot 6 different slugs moa at 100 yards. 

Why not get the 1:7? Being a little fast doesnt seem to effect the smaller calibers. I have shot 65 gr in my 1:14 and it shoots 92 gr just the same

Yep. Couldn't have said it better. Its just a copy of the AF with a longer valve body. 

Waste of money. The 257 valve is a 308 valve. It is way over bore size. Plus the 257 shoots bullets faster then there accurate already. Specially if you add a 3600 psi tank. If you want a better poppit I could make you one. Simple cheap fix 

Tank could be leaking. I have one that was leaking through the carbon because of water damage to the liner. I used a spay bottle with soapy water and it wasn't hard to find. Tank wasn't mine. Was a friends and filled only at the shop he bought the tank from for 5 years. I then put it on my...

The escape valve is 5/8" thread and condor valve is 18mm. Will need to get a condor body and transfer the parts off the escape valve 

Have 2 sets of rings. Rings were mounted but never used. To tall on top of coldshot bases. $55 a set shipped in US

For your info there is no 4500 psi tank for the Texans. There all 300 bar/4350 psi. It's funny how a 4500psi valve is made but the tanks are not 4500 psi. Now it says the valves are good for 4650 psi. So basically telling you to over fill a tank by 300 psi Only true 4500 psi tanks are paintball...

5/8-18. All American paintball tanks are.

I only really shoot AF big bores. All are custom. I do a lot of testing. My 50 cal gets 40-50 shots on a 88 cf tank depending on what pressure I'm shoot at. When I go shooting I bring 4-6 tanks. They all get used.

I sold the Alkin as a demo. Couldn't justify having 2 compressors that were almost the same size. I'm looking at getting another one. But I need more cfm so it would be the W31 4.9 cfm or the W32 that is 10.8 cfm. I have lots of tanks😁 I have 7 88 cf, 1 66 cf and a 44 cf. Plus I have 2 470 cf...

This setup is not on the Alkin. It's a different compressor.

This is how I have mine configured. I talked to Aydin today. I said this would be a good way to set them up. Then put the adapter on the hose. But its funny how not one I have of the people I have sold a Alkin compressor to has had a issue with the whip. I have never received a call or...

If you want to bleed off pressure in the hose use the bleed valve on the filter. I had one here as a demo and I could fill guns, small tanks and large tanks. I had it with a foster fiting on it. If you want to bleed off pressure so it doesn't hit the blow off use the valve on filter tower