Search results for query: *

  1. Rathunter1964

    Pard DS35 ballistic calculator issue on short range

    Hi its so easy! Let me first tell you. Shoot your gun in for zero example at 20 meters with your ballistic calculator of. Then after you fill the parameters correctly turn on the ballistic calculator. Go to the distance at 5 meters (thats the minimum dsitance you measure with lrf) ant shoot. For...
  2. Rathunter1964

    Thermal optics

    Footage from my pard 640 zoom 25 - 50 mm
  3. Rathunter1964

    Pard SA62 and Ocelot Thermal LRF Help

    The problem is that you cannot change the lrf position (red dot). You can only changes the position of flashbox but you can not see were red laserbeam pointed is. The only solution is mount no limits mounts or shimming your scope to bring you flashbox more to the center inzoomed wise.
  4. Rathunter1964

    Pard SA62 and Ocelot Thermal LRF Help

    Hello, i can't get that clear in my head! I have on my agn vixen .22 a 0 moa rail on it. De scope is a pard 640 zoom 25-50 mm thermal. I have standards mounts on it but the lrf box a bit far of the center tot the high. On what side of the mount (front or rear) must i take higher or lower...
  5. Rathunter1964

    Pard SA62 and Ocelot Thermal LRF Help

    Its not working on a thermal device because you cant see the lrf splash
  6. Rathunter1964

    Tuning FX Impact Mk2/M3 - slower first shot - no reg creep - quasi-scientific analysis

    I ordered from Mubhaur the special aluminum plenum part and ik must say it is working great. With the original part from FX ik had with the first shot a lost 88 fps. It took 6 till 8 shots to get the 871 fps. That was my tuning for .25 m3. Now the first shot is 865 fps en the second shot...
  7. Rathunter1964

    Tuning FX Impact Mk2/M3 - slower first shot - no reg creep - quasi-scientific analysis

    Hello, i follow this thread fully, because i have also lost off velocity (39 fps) with the first shot with my impact m3 .25 caliber specially used for rathunting. I have a huma reg in it at 110 bars with no creep! I schoot at 872 fps. Can i replace the pur oring for this one? O-ring 2.84x2.62 mm...
  8. Rathunter1964

    Zulus LRF off screen when zoomed all the way in?

    Try this and you know what moa rail you must use for your rifle! The y vallue must multply 0,26 (1 click is 0,26 moa) thats the value for choosing your moa rail.
  9. Rathunter1964

    Zulus LRF vs non

    I'll choose nowadays scopes for my rathunting with lrf. I have now the hikmikro Panther pq 50 with lrf. Its very easy to use it on the shorter distance such as under the 20 meters. My pbr is lying in a killzone of 1 cm from 21 to 41 meters there for its not so necessarry. I schooting with...
  10. Rathunter1964

    Slugs for urugan 2

    Thank i will try them!
  11. Rathunter1964

    Bc hades .25

    Thanks, i also gone use the 0.026.in my Hikmicro panther 2.0 PQ50 scope
  12. Rathunter1964

    Bc hades .25

    Thats what i hope to that some one did testing with the new fx ballistic calcualor
  13. Rathunter1964

    Bc hades .25

    Hello can anyone tell what the real BC is for .25 hades pellets? Because if you searche in the ballistic elements app in the list the gave 0.036. Otherweise the hardairmagazine give 0.026 BC. What should be the right...
  14. Rathunter1964

    Slugs for urugan 2

    Thanks!
  15. Rathunter1964

    Slugs for urugan 2

    Thanks, myself i would choose the knock outs 23 grains about 890 fps. i have no experience with slugs, but i have seen different movies on youtube and were the H & N s 25 gr did not score so well as jsb an zan's. Is that correct?
  16. Rathunter1964

    Introduce myself

    De Pein!
  17. Rathunter1964

    Introduce myself

    Oke wich part of Friesland?
  18. Rathunter1964

    Introduce myself

    Ik hoor hier Fries bloed :D
  19. Rathunter1964

    Another rat with krait

    Thats a good hit!