Search results for query: *

Thanks Guys, I only watched the video up to the point of disassembling. Watching the full video I see these are the seals I need ( 2.9 x 1.78 NBR70 Part Number 15016) * 1 ( 6.07 x 1.78 NBR70 Part Number 15015) *1 ( 7.5 x 2.0 NBR 70 Part number 19225 ) *1 (11.9 x2.62 NBR 70 Part number...

I saw most of this but must have skip it ❤

@Gerry52 I haven't been able to find one with the breakdown of the regulator, I've checked other part docs as well but again not a breakdown of the regulator similar to the one in the bobcat

I know this is an old post, but in your research did you find the part number or a breakdown of the regulator A33 ?

Thanks Garry, I would but I don't know the size :)

Cheer guys, I will reach out to them, I'm not in the US hence why I didn't call them first.

Cheers, I'm trying to track down the internal seal sizes for part A33 form the pdf From the research so far the outside rings are O-ring 11.6 x 2.4 NBR 70 Also if it matters my PCP I'm running with is slightly different as it uses the copper pipe from part Y to Part A46

Just found out my bobcat mk1 regulator is leaking an it seems to be the internal seals (o-rings) on the reg, does anyone know where I can buy these seals internationally or what the sizes are, I've included a picture of the regulator that is installed in this PCP

Thanks JimD, I did see this way but it seemed more for the later gauges and not the type on the Bobcat, I'll give it another view.

Hi team, I've bought a second-hand FX bobcat (love it) and there are a few small issues with it that I'm repairing as I go and learn. I noticed that with this PCP the 2nd stage of the trigger wasn't working hence, I took the stock off to clean up the lever and readjusted the second stage, as...

Sorry to hear that, so far I haven't had any leaks but I have had it once where the pressure value didn't reseal after a fill and I had to let it run nearly empty before I could shock it, thank goodness I was using a compressor and not a hand pump. On that, I can imagine using the rifle and...

What a mess, I thought the marks on it were only skin-deep, but when I took the shroud off the shroud compensator was all messed up as well, think someone must have tried to remove it without first heating the lock tite :(. Cleaned that up while I was cleaning the rest of the rifle, thank...

Wow guys, I must have some settings turned off and I missed all the comments, thanks to everyone who responded and sorry I didn't reply until today. I was working with RM100Guy and in the end we got to the bottom of it, first off as I was new we went to a baseline of known pellets which were...

Hi Team, I’m new to air rifles and PCPs in general, and I’m seeking guidance on my recently acquired secondhand Bobcat MK1. Here’s what I’ve observed so far: Bobcat MK1 Details: I believe it’s an updated MK1 because its body resembles the MK2, although it lacks the gauge on the front. I...