Search results for query: *

Great video, the previous ones was the reason I looked at the avenge-x pcp. Have the bottle bullpup version and for a first pcp I am very impressed with the out the box performance.... Not sure if it is my location but my reg pressure / hs spring combos are way less than yours. E.g 18.13 running...

I have the bottle bullpup, put a bottle clamp on your mount the bipod, my bottle is 50 mm and got a clamp for that

See item 137 on the side of stock

I think there are four screws for that two on each side of the action, and two under if I remember correctly, must come out as you can swap stocks with the same action.....

Check the YouTube channel which shows how to swap classic to bullpup etc, might be what you need

Great pellets, very accurate in my avenge x 22 pcp. Can we get specs of the pellets so that they can be added to strelok pro and the like apps ??

Here is the chrony results of the 25 grain

Thanks thinking of shooting out the 18,s and going with the 25's going forward then maybe pushing speed up to 850 - 880

Was playing with reg and hammer spring today set reg to 125 bar, 18.13 grain JTS running at 920fps, 22.03 grain JTS running at 850fps and the 25grain JTS running at 800fps. Target shot at 50 meters between the wind plus me playing with my strelok pro to get my bc calibrated... Met another...

Thanks, I have a labradar I use for my center fire rifles so used that to measure speeds. My hammerspring is completely turned out, counter clockwise. Have not sat yet to fingerprint gun with reg and hammerspring turns yet. This weekend was my anniversary so the rifles were left alone , you...

Yes currently on 1500 psi no hammerspring for 18 grn.

I started on JTS Dead Center pellets but I also only hear good things about JSB... I also bought some cheaper 18 grn pellets from turkey called Velocity. Got some JTS 25 grn in the week to test with as well Distance is 20 meters on these

busy with mine, i have dropped my reg down to 1500 psi to get 880 fps on 18.13 grn pellets. Hammerspring is all the way out. i still need to sit and tune... will see if i can get a tune on 25 grn pellets and then see if i can shoot the lower grain pellets using the High \ low wheel. after...

Time will tell, have 18 and 22 grn jts pellets and just bought the h&n slug test pack... but my initial thought is to tune for 25grn

So it has the stainless reg in it, during shooting so far no visible creep, but I have noticed that after a week the reg did go from 1500psi to 1800psi... have not had much time on it as yet. But nothing that concerns me at the moment We have the alum bottle here in South Africa so a little...

my first PCP is the Avenge X, very good value for money in my opion if that counts and accurate out the box, fully adjustable hammer spring and regulator all externally without having to tear down the rifle

General question, has anybody tuned there PCP - Avenge X to use one pellet \ slug on High power wheel and the be able to use low to shoot lower grain pellets. have to still sit and play with my tuning but was just wondering. or is it probably best to tune a pellet\slug and use that one moving...

After cloning

Further searching I found the following under the drag setting

Had a look around on the Facebook page etc. Looks like the multi bc option in strelok