Search results for query: *

Good data, thanks for sharing!

That video you sent was FANTASTIC! I finally understand now what tuning to the "knee" is as well. I've read the instructions for doing this and heard it spoken but by him putting it into a graph really helped to drive it home, thanks for sharing that. Finally received my pellets and worked on...

This listing has been renewed

Believe it was inside the shroud at the end of the barrel. I sent this back the next day and don't recall much about where it all was now. I honestly didn't even know there was something like that in there until my pellets were not coming out and things were rattling inside. I moved over to FX...

That is exactly what I'm noticing with this wildcat as well. With power wheel on 7 I'm shooting the 25.4s between 896-900 so is this what we would call a low ES (I'm still learning the lingo). When I change over to 18.13s and power wheel down to 3 the ES is all over the place, anywhere from 850...

Thanks for your perspective on this. Pretty much where I'm headed also with the 25.4. You posted a nice read on another post about tuning with regards to adjusting the hammer spring. I copied and printed to keep for reference ;). What all do you shoot?

Sounds like a good plan and exactly what I'm waiting on now. Have suspended all tuning until those 25.4s come in, hopefully today. Will take a look at the video. Thanks for posting.

I have the slug side down so more air goes in. So I have been working with the 18.13gr FX because I'm out of the 25.4 grain, suppose to have those today but all the snow we had last week has delayed those from arriving. Also to confirm, do not be on power wheel 4 trying to adjust with the...

Yes, I did go thru last week and found that the barrel was loose at the transfer port. I did a small amount of blue loc tite to keep that from happening again. Went out and found the groups seemed to be doing really well as far as being tight and no POI moving about. Today seems like that has...

I have been moving it and I still have not found that sweet spot yet, my fps seems to still be jumping around no matter how much or little I turn that macro. The frustrating part for me is that just when I THINK I have this thing dialed in and zeroed the groups will move and change, move to my 1...

I did bump 1st stage to 135 and second to 110psi, doing some pretty good groups with 18grain FX on power wheel either 3 or 4 at around 900fps, but running low on 25 grain FX pellets and that is what I'm primarily wanting to zero in on. Suppose to have pellets today but UPS is still delayed with...

I do appreciate your follow up and apology. Perhaps good tunes are guarded like a family secret recipe and meant never to be shared? As I mentioned earlier I'm new to the world of PCP and FX airguns and just trying to learn as much as I can on them, the way I learn is by asking questions. I just...

Absolutely helps, appreciate you sharing your knowledge to me. Not new to shooting and not new to airguns but new to the world of PCP and FX. Some people really do come off ABRASIVE in here, guess they just need to blow their horn to feel good about themselves....whatever! Confirm ES an SD...

Well chucka under every one of my post states wildcat sniper and sniper is the long 700mm barrel so Excuse me if I failed to mention that in the title. So now that we have that all CLEAR and you AIN"T MUCH on sharing tunes anyway what exactly was your point for your post?

Oh yes, have watched all of Steve's video VERY informative and leaves nothing uncovered, that is where I picked up trying to keep the spread from 1st to 2nd stage between 25psi. My FPS is still not as tight as I would like for it to be as it varies by 15psi from shot to shot. I might try going...

What reg pressures are you running 1st and second stage? Would ask about the power wheel but believe you folks have 16 setting on those?

Why am I asking? I'm still new to the world of PCP and FX and so the way I gain knowledge is by asking questions. I would like to see what reg pressures other are having good success with. I'm not convinced that reg pressures 125 and 100 are the best ones. I like shooting 50 to 100yds.

I just posted pretty much the same question as I have almost the exact same rifle (wildcat) and pellet. I'm running 125 1st stage, 100 second stage and with power well on 7 averaging about 890 on fps. What did you end up going with?

Still learning my new Wildcat 22 and curious to know what some of your favorite tunes are on your rifles? I'm currently using the FX 25 gr pellet and running a 1st stage pressure of 125 and 2nd state of 100. With power wheel on 7 I'm staying pretty close with 888-894fps, sure there is room to...

Awesome! That was fun, can we do it again????