Search results for query: *

It is a semi auto airgun. They are never as accurate as a bolt action version. The bad grouping is perhaps caused by the barrel and the auto function. In my semi auto Hatsan normal lead pellets also made bad grouping. Now I shoot the Baracuda Power and it is better.

Grappig dit. Succes er mee zou ik zeggen.

If it is the case that it is a M8X1 tread, there can come some good out of it. That Huma will have in the future gauges with that tread and that I will be able to order some for the Snowpeak Guns. ;)

Then it will proberbly be M8X1, just like the Snowpeak airguns have on there pcp gauges. It also is not a Wika gauge, it looks like a cheap China part actually.

I can understand that you asumed that it would be 1/8BSP Strange that it is not. Are you sure that the Sekmet is 1/8BSP. Because they are available in multiple treads. Or is the tread M8X1 in the FX? Double check it with something else that is surely 1/8BSP

Is het draadgat kleiner of de opening in de kolf? Is the tread smaller or the opening in the stock?

It would be beter if you drilled a hole for the hamerspring screw instead of filing out. Good idea for the reg screw. But you must drill another one when you put a power plenum on it.

This is mine HW77k Special Edition, they are rare I think.

The JSB 4,52 8,44 grain should betreft way to go.

I always shoot the 100 meters indoors. Great if you shoot an airgun and offcourse a transport system for the shooting card. ;)

Oh, I use them in my HW77k which is 16Joule and in my HW77k which is 20Joule. Bothe with the same results.

I always shoot the JSB's 5.52 in al mine .22 air Guns. Can't say that there is a better pellet. Tried multiple, but the never do as good as the JSB's

The HW77 is technical the same as a HW97k.

JSB Exact 5.52 Shoot those in my HW77k. Here a 5 shot group at 25 meters indoors.

FX Dreamline classic .22 with special modified stock. The standard synthetic stock is to flexibele. It's the newer version with the AMP2 regulator and larger plenum. Added an extra power plenum, 600MM barrel with Superior Liner. No silencer. HuMa regulator and Slug probe. 2 barrelbands, lighter...

Mine was quite easy to unscrew. Just keep on turning with a spanner I supose?

Shoot HFT1 and get started with 100 meter airgun competition. Did HFT2 in the past.

I modified my trigger of the Invader with a larger triggerblade and different springs. Also polished every contact. I think that the semi auto function works different than on the Invader. There is no real shroud on the barrel where the piston is located on the Hatsan semi auto models. Like to...

I used toothpaste ans the Dremel

Polish it.