Search results for query: *

Thank you very much for your answer

Thank you very much for your answer!

Hi everyone! What are the different methods of charging an FX True Ballistic Chronograph battery?

Hi everyone! Sorry if my question is out of line with the main discussion, but for some reason I can't post my question anywhere else. What is the best charger for the FX True Ballistic Chronograph? Can iPhone chargers be used?

Thank you for suggesting Harbor Freight Picks. I will get them

Hi everyone! A report on how I tackled the very stiff O-ring inside the receiver bore. I blew with high air pressure inside the bore first, but since the O-ring was very stiff, it did not budge. I dropped some acetone on one side of the O-ring a number of times and break cleaner on another...

Thank you Scotty1 Thank you for the info. I do have dental picks. The problem is the O-ring has become rock-hard and the dental picks can't penetrate the O-ring to remove it and with a dental pick I risk scratching the surface Thank you for the suggestion. I will give it a try.

Hi everyone! What metal is the Crown receiver made of?

Thank you darylm. The o-ring is as solid as anything. But it's worth a try.

Thank you Stubbers. very good idea. I will try it out.

Hi everyone I have a similar problem as Steve-In but I have found that the O-ring in question has petrified and I can't stab it with a dental pick or a needle. I had a similar petrification o-ring problem on the brass pressure regulator and I eventually placed the brass regulator in acetone and...

THANK YOU again. yes, I must get a set of plastic O-Ring picks. They are essential!

I had never seen anything like it. The O-Ring crumbled into tens of tiny pieces as I gently pushed against it. I purchased The Crown 4 years ago and it is a 2017 model. As I have other air rifles. I had only shot about 1000 pellets with it. I was really shocked to find that all the O-Rings had...

All the best Scotty!

Hi There. No. its the one inside the regulator housing that you unscrew from the Block which holds the regulator I had disassembled the regulator and then I got impatient and soaked the regulator in acetone, as I figured acetone will not damage the brass regulator housing and the O-Ring has...

Hi, cwcarrera, Thank you for your response. It's D28, The 4x1.5 NBR 70 that sits inside the piston end of the regulator housing. it seems it's glued to the O-ring groove. It's flat and extremely hard. I don't think there's any way it will come out using conventional methods. The dental tool I'm...

Hi Everyone, I need your help I have a serious problem with the inner O-Ring on the regulator housing on Crown MK1. The O-Ring in question has flattened and hardened so much that it is impossible to stab and pull it out. I used a dental tool and tried for two days trying not to scratch the...

Thank you everyone for your help!

Thank you for the information you shared. You were right. The problem was with the regulator. I'm sourcing the O-rings from a friend this time and soon I'll do what you suggested. Thank you again for sharing your knowledge with me.

Thank you for all the great information.