Search results for query: *

Is it 10 rounds repeating though?

So today i did my normal re tightening of the main screws on the gamo. From my inspection the of the two main anchor 4mm Allen Bolts in the front foregrip seemed stripped and thr bolt goes much further deeper in than the other side that does t have the stripped hole. The hole is stripped per say...

There is a space around the metal barrel 360 degree and then there is the plastic shroud that the barrel sits recesses in. In order for the barrel to be perfectly still you need to use the baffle to take up the 360 degree space around the front of barrel Inside of the recessed plastic shroud...

How am i going to reach the crown? As you can see the barrel is pretty deeply recessed inside the shroud. It's not like a normal break barrel where the end of the barrel is easily accessible. Also won't shooting it with the barrel loose inside the shroud make it not accurate aswell since it's...

Sorry what does re crown mean?

Here's some additional pictures Incase this might help anymore figure out cuased this and what to do next if it's repairable? Is the baffle supposed to just slide on the inner barrel loosely? Or is it supposed to be glued or mounted with force? I tried to push it on as hard as I could but it...

Are the inserts not supposed to be two pieces?

I took the front cap off, the two part red baffle came out with ease, I pushed the two halves back together and slid it back down the shroud unto the metal barrel. I tried to hammer it down, I tried to make it as tight as possible before putting the cap back on to secure the baffle back against...

Could you elaborate a bit on the loose suppressor? From what I could tell after removing the cap and baffle and looking down inside the shroud, there was a barrel inside the shroud with empty space between the metal barrel part and the outer plastic shroud. The red baffle is 2 pieces split down...

It does have a magazine but ive been very carefull not to load two Pellets. So far I have taken out the two pins and the baffle came out. A bunch of plastic bits from the baffle and pellet shards also came out. I put the baffle back in the best I could and then out the cap back on. Going to test...

The same thing happend to yours? Was it shooting wildy inaccurate? Because mine still shoots all over the place even with the baffle broken out like this. Theres 2 pins to be removed wich I will remove and take th baffle out. But even if I replace the baffle what caused this in the first place...

What could cause this though? Even if I put a new damper part if I don't figure out what caused it in first place it happen again. And even now with this giant hole and a clear baffle the Pellets are still so inaccurate......

So today I took my Gamo swarm fusion gen2 .22. Lately the gun seemed to have been acting up but I thought no couldn't be, must just be me. When I first got it everything was good. But over time started to notice some discrepancy. I'm not the best shot but I'm definitely not as bad as what was...

The discrepancy in accuracy only happens when I switch pellet types. If I zero in on one type then it hits dead on every time. Yeah its only 30 feet I was also surprised that such a small difference in pellet makes an inch difference at such close range but thats just how it is... the inch...

Ok I see. My scope doesn't have marks just center cross. I've wanted a better scope for while but I've had a really hard time finding quality 1" scopes. And it has to be 1" because I use these scope rings that allow me to see my iron sights through them and I dont want to give that up. And...

So I have a gen 2 gamo swarm 10x. Love the gun. Got a scope for it finally and ive noticed after zeroing it in many times that there is a distinct inch to 2 inch vertical discrepancy between my gamo 15.2g/16.2/21g Pellets and my Crossman 14.3g Pellets. If I sight in with the Crossmans than my...

Ok thanks guys looks like I'll just let this go. No further help required thank you for your comments.

Is there no way to delete threads? I was going to delete this now that I've gotten an answer to avoid further email spam. But again can't find delete button lol..

How do I delete my classified wtb add? I keep getting emails to renew it but I don't need the add any longer I just want to delete my wtb? Can't find the delete button anywhere just edit. Please help. Sorry if this is wrong section I just wana delete my wtb so I can stop receiving emails to...

This listing has been renewed