Search results for query: *

i go out there sometimes and it seems like there are tracts of land that would be good. Kaneohe here

Absolutely. But I mean what are you comparing it to? Unsupressed or the standard L2 supressor? For the moderators I have with the L2: 1. Huma 40 with 4 sections 2. Behemoth with 3 sections (second only because i dont have a 4th section, but its already pretty close) 3. L2 350 with modified...

Well if you're gonna get one, you better do it soon. Since they are a Russian gun, they are becoming harder and harder to come by. But you can't go wrong with an Edgun.

That looks amazing! I was reading that apparently these can shoot arrows as well, are you planning to do that at all?

Yeah, I've noticed that too. Probably varies because each base type would change the actual dimension. I'm sure an email to him would satisfy our curiosity.

Yeah just checked, its NSA (61.5) 0.146/r vs AVS (various grains) ~0.21/r. So about 50% more. But if you're trying to go for big game it is probably a real minor consideration.

Doubt it will work really well since it's in .300. If it's too loose in the mag, it won't seal properly. If it's too loose in the barrel, it won't stabilize properly. It's why they started making .303 for the L2. If someone really wanted to maximize slug potential they could try these...

I highly recc the Huma 40. I also have the Ronin and the Huma is much superior even when shortened down to three segments. I mean you could also get the Behemoth from EGW. Got an email from him last week saying they are coming in near the end of the month. I expect it will be just as good or...

Pretty unsure about the 35 cal. Biggest limitation would be the size of the magazine as they are all essentially the same size just with different bore diameters for each. It would also be limited by the length of the magazine which I think can accommodate up to 11mm in length. I haven't maxed...

Well a few hours with a scalpel and some sandpaper got it wide enough and its shooting extremely well now. Guess the hole really was too small xD I will say though that I am really impressed with the STO insert. I had my ear near the muzzle and literally all the sound was coming from the action...

I thought that too initially, but I wasn't seeing any damage to the core or moderator cap. I took it apart again and it looks like there is a very slight curvature to the core. The last segment hole also looks like it has a much smaller diameter compared to the rest of it. I'm going to grind...

I'm guessing you are using the standard version of the STO shroud core? I put in the extended version for my L2 .22 250mm and its sending my groupings all over the place. What BAR or FPS is your regulator set at?

I have the Ronin and the Huma Mod 40 that I use on an Impact. I like the Mod 40 more, overall quieter and lower pitch. Adjustable size. If you get a Huma remove the fabric inside the starter piece.