Search results for query: *

Ok got the regulator out and measured where it currently is at. 50.1mm which is after I maid the initial 1/2 turn CW through the tube. So I am assuming that I did adjust it correctly the first time. @JimD when you say the useful range is from 50.4-50.6mm, is that basically the range between...

That sounds like a useful tip for length setting. As I am trying to get my FPS down to around 800-850, do you think 50.4mm would be a good starting point? Not sure where it is at since trying to adjust it from inside the tube previously. I'm about to attempt to take it out from the front as...

Ok, so makes sense with shooting with a pellet. I just wanted to do a quick test indoors since it has been 110° this week. I went ahead and sweated it out today to test outside. Results did change slightly with shooting a pellet. I decided to test my "shorties" while I was at it. I tried to...

PT6708. The first one I bought wasn't working right and was inconsistent. The 2nd one surprisingly gave me consistent readings once I figured out how to set it up correctly.

I've used alternative material as well. I have brass sheets that I can cut to make work. The shims posted though are quite nice as they are very thin and made for these scopes (same width and has screw hole) and can be layered to fine tune the scopes. If you've use these digital scopes with...

After getting a new moderator, I decided to do my own testing to see which of my "larger" moderators were the quietest. Dry firing out of the same regulated gun at the exact same distance, and re-ran test 2 more times to verify the accuracy of the original readings. Surprisingly the retests...

One of my Pard night scopes came with these really nice metal shims. Has anyone seen a source for these? I tried to email pard but haven't heard back yet. They work really well to shim all of the digital scopes that I have. Would like to get a few more of them.

What's the consensus on this moderator? Just got this today. Haven't tested it yet. First impressions, priced right, on the heavier side, looks very similar size wise and internally to my Sumo, matches the color of my Ghost perfectly. Not sure yet where to hang it. My Ghost is pretty happy...

This moderator is one of my favorites for sound. It does take a little getting used to looks wise lol.

Thanks for the suggestions. I really like the looks of the Diana Mauser AM03, and kind of like the gas piston option. I wonder if this has standard 1/2x20 threads. Anyone own and have any input on this model? Nothing against woodies, but I think prefer the synthetic look.

I'm struggling to find any info on how to remove it from the back. Would you happen to have any more info on this?

Yeah, I tried one of those and they're too big for this scope.

Well, I tested it, and seems that it had the opposite effect (went higher FPS). I thought for sure that I followed @JimD 's instructions and went 1/2 turn clockwise to lower the FPS, but maybe I fubbed and went CCW... Just to confirm, CW is the correct way to go on the regulator adjustment...

I mostly have PCP air rifles, but am looking to add a decent springer or gasser rifle to the collection. I've noticed that most of the options out there today don't seem to be moderator friendly (have threaded barrels). Why is that? I want to be able to put on one of my LDC's if I buy one of...

This has been one of my more accurate guns under 30 yards. I'm quite happy with it. I ended up adjusting the regulator down as @JimD suggested. Just an FYI for anyone attempting this. "a long screwdriver" was an understatement lol. You need to get down roughly 16" of tube to get to the...

0db 160 should be plenty quiet for that gun assuming the correct caliber version is used. I'm guessing you are probably using the 110 version?

I bought this Discovery scope on amazon a while back. Amazon Link The magnification ring has always been pretty stiff, so thought I would look for a throw lever. There is an obvious screw on the ring that I took out to see what the threads were, and realized that it's not what I thought it...

Still chasing this leak... I sent it back to AOA last year. They supposedly didn't find much, but said the regulator looked a little off, so they rebuilt or resealed it or something. It seemed like it was holding air for a few months after, but now is slowly leaking again. I was actually able...

I'm looking at some of those other Tuxing compressors like you have. Honestly it's hard to tell the difference between most of the models. The model #'s are quite confusing. I'll have to see if I can find an accurate model comparison chart. I'd like to get something that will fill my 6.8l...

I don't think these burst discs are that precise. The 7.5k discs are suggested for fills @ 4500 psi, Which is what I fill to.