Search results for query: *

Well I’ve heard of regs generally creeping up but on my Impact MKII it creeps down. This is the FX AMP Reg. set to 164 bar. Three times now I’ve had to bring it back up from 154 or 157. And this happens within maybe 1/2 to 1 hour. Does anyone have an idea as to why? I have a high pressure...

I’m wondering if anyone has an opinion as to these two lubes. I’ve tried both but only once each so not enough data. The liquid silicon oil seemed to have an edge but again too early to tell. The weather has been lousy for a month straight; can’t get out to test. The WD-40 Specialist...

Recently I was starting to notice that my groups were opening up at what was once a very nice tune. I did the usual, barrel clean, check hammer stop, check HSTA, scope mount tightness, etc. So I thought I'd re-tune. I was watching Dubber's video on tuning for slugs at high power. Long story...

Came home to this the other day…. 2500 rounds from NSA, and not a moment too soon. Was on my last box from July. Thanks Nick!

Picked up a CF liner for my .25/700 mm Impact II. Did not glue it. Great groups on my first outing at 50 and 100 but tonight I went out to 145. I only had about 30 minutes til sundown after work so I don’t think I was quite in “the zone” racing the light so some targets are worse than others...

I’m trying the NSA 38.9 gr slugs in my Impact2 w Superior Heavy liner at 900 FPS with excellent results. Reg at 118-120 bar. Best groups at PW4. At 50 yards consistent 0.2” groups. Only tried once at 100. One shot was a flier the other four in the red for a 0.447” group. Is anyone else using...

Ive got a JimC Innovations QD adaptor that runs from m Ninja tank to my Drozd Blackbird and an internal part has fallen out rendering it useless. does anyone know if JimC is still selling Drozd accessories? Also If i can't fix it, can anyone recommend a replacement adapter? Here is a photo...

I have a Cricket .25 which used to get 860+FPS with JSB heavy MK2. Now all I can get is 850. I have replaced the hammer spring from Georgia Air guns but see no improvement. I rebuilt the gun completely a year or so ago but have been shooting my FX more. I’m discovering that I never should...

I’ve just entered the realm of benchrest. Was having bad luck with my other guns when I decided to pull out my old 2013 Kalibrgun Cricket. This gun can sit in the case for six months or more and have the same pressure reading as to when I stored it. First shot is always spot on. My other guns...

Got a new Gen 3 impact Huma reg 135-200 bar reg. it will not release air when adjust screw is turned counterclockwise with the bottle unscrewed/disconnected. Any ideas. Thanks

The winds finally died and I was shooting 38.5 gr NSA's at 100 and getting real decent groups. The sun was almost down and I got a wild hair to try a target at 230 yards. Been waiting all week for the winds to calm down. Normally I can get out to about 165y, then the land drops off into a...

So for the past year I've been trying to get my Impact 2 to the point where I could quit testing and tuning and tuning and testing and just start having fun and doing what I bought thing for....... long distance shooting. It's been frustrating but I got a lot of help from several of you guys on...

I’ve heard that the Impact 2 has a 20 MOA rail. I don’t know if mine does. Wondering when this was added? I bought my impact one month before the release of the Superior liners. Probably the same for the rail. But I have no limit rings so no biggie. 

Could anyone explain why Dubber tunes at PW-3 on his new video? I always start on Max on my power tunes.

I have an Impact 2, .25 cal. The regulator has been acting strange. long story short I ordered a new piston and washer set. In fact I ordered two washer sets as the first set would not allow the reg to go beyond 50 Bar. Same for the second set. so went back to the first set. Confused? Me too...

So I’ve been spending a lot of time tuning for Nielsen 33.5 in .25. Got a Huma Dual TP, and an FX pin probe for my MK2 Impact. Got the 700 mm Superior Heavy liner... Fixed leak at the high side gauge and thought I was finally onto to good results, and they were. Had heard that 38.5 gn...

Great slugs, and after they’re gone, (and oh too soon), the box makes for a handy dandy phone holder for watching movies or reading posts on AGN!

I have an Impact MK2 with PP/700 mm Superior Heavy/ Huma Dual TP/ FX pin Probe and the 57 mm HS. (not using the power kit...only the pin probe). I'm tuning for 980 fps+ with NSA 33.5. In order to get there I am at 130 Bar on the reg. and have the HSTA almost all the way in. I settled on 995 at...

I recently installed the Huma Dual TP V2 in my Impact 2/pp/ 700 mm. I tried it first w the FX OEM pellet probe and was getting my target velocity of 980 at 133 Bar and very good accuracy w NSA 33.5 w the Superior Heavy Liner Then I picked up the Huma high flow probe to go w the TP...

I walked into the gun closet yesterday and saw this on the floor. I’ll be gal-dangged if I know what it is. Anyone have a clue. Embarrassed that I don’t know Thanks