Search results for query: *

I'm already using ball end, without ball end there is no way to adjust. My dad owns the same impact as I do, but the screw is much further in than mine. The problem is though, I can't remove the screw, it's stuck. Looked up the manual, seems to have no function. But don't want to force it.

I've been adjusting my second regulator on the FX Impact M3 .30 quite a bit, but reaching the allen screw has been a pain. There is this little 1.5 screw at the trigger which guards it. Now I've tried adjusting it in which gives me more room to properly stick in an allen key. This little...

1st and 2nd reg pressures are at? What FPS are you shooting those? It's quite normal with an M3 with three regs. Hearing the first regulator filling the plenum at the second reg is normal in my opinion. Actually when I lose the sound, I check my regulators if I'm not shooting below pressure...

Took off the air bottle, dry fired. Let the gun bleed dry. Turned the second regulator all the way back, turned it back up towards 100bar. Was 110 bar from the factory. 844-860 fps with 50.15gr pellets, so yes the huma parts did actually improve my FPS with less bar on the second regulator. 900...

You might be right, .30 cal is a whole different beast. I also own a Walther Reign M2 L .25. Just comparing the pellets .25 vs .30 in JSB Pellet/Hades/Knockouts have a whole different depth to them. Even the skirts are different in design. What I've learned is that you can't compare .22, .25 and...

So it has been a few weeks, weeks with rain and freezing outside. Had a day off today. Ok weather is still cold.. F it, lets play around with the M3 .30 cal!! (Been searching this forum for al sorts of topics during the past 2 weeks on this subject. dual hole, pellet probe, pin probe etc etc.)...

How much bar is on each regulator?

I see what you mean now. Loaded up a pellet from the magazine and took the barrel out to see how it fits: Looks like it's properly pushed in. Still haven't had time to tune the gun yet, dark early and lots of rain during the weekends.

You mean the pellet/slug line up in the barrel? Or the actual transfer port. Took some photos as comparison: Huma Air Dual Hole installed, you see a small silver line: Original FX (My dads FX M3 .30). bigger silver line: As if the Huma Dual sits back deeper, but when looking at the...

Impressive numbers. No coyotes around here, just small game like rabbits. My goal for now is at least 950 fps with 50.15 gr pellets/slugs (jsb pellets/knockouts). Increasing the 2nd reg from 110 to 130-150 means I need to adjust the 1st regulator as well I guess. Not sure where I got the numbers...

What do you mean not lined up correctly? The barrel is all the way in, can only be done one way as it falls into the notch on the back. With the original transfer port I could see a small silver line at the end of the barrel. Also you own a .30 cal? Will start to play with the gun more, perhaps...

Small difference, both rainy days. Maybe a 3-4 Celsius temperature difference. Shooting into a wood stack, but last Saturday was more windy.

So last weekend I installed the Huma Air dual hole transfer port + pellet&slug probe, in hopes to get a little FPS improvement. In a .30 cal I wasn't expecting huge gains, but certainly not less FPS. Before installation I took 9 shots to compare later: 1: 842 2: 840 3: 837 4: 842 5: 835 6...

Thanks. I will have to tune at some point, because .30 cal is sold out everywhere. I only have 50 grain+ pellets/slugs. 92 shots is pretty impressive, to what pressure do you fill the bottle?

Thanks for the great help TMH. Took my worries away. I will monitor my Reg no1, just saw it creep up a little to exact 170bar and has been there for the last two hours. Will leave it overnight to see what it does. I will do some proper shooting, perhaps it needs to break in like you said. I...

Hi TMH, Thanks for answering my questions. About (1. The air tank sits around ~210 bar. I dry fired 5 shots, the Regulator No1 went down to about 165-168 after 2 shots, fired 3 more to make sure: Is there any reason to be concerned that the reg no1 is creeping up? I do have to mention that...

Hi All, First of all great community, a lot of useful information going around. I have been thinking about purchasing a PCP rifle for quite some time now, this week I couldn't hold myself anymore and decided to purchase a FX Impact M3 Sniper .30. Quite an upgrade from my old Gamo .177 cal...