Search results for query: *

Realistically HP vs standard power was only really determined by how far they wanted to push the board, I am sure all Rosso's were GCU1's but again there is no reason why you couldn't fit a GCU2 and go for full 65FPE .22 or .25 or 80odd on .30 It's a very fluid rifle the RW and it is what you...

I don't think they ever sold them in .30 cal - that said there is no reason why you couldn't put a .30 barrel and probe into it and use it in .30 

90 should be very achievable. I would stick 2nd reg at 150bar and first reg at 180-200 and see what you get from there. I presume you are getting the 700mm sniper for the extra FPS?

If you change nothing else on the rifle nothing will change as you are only changing the pressure the 2nd reg is seeing, this has almost zero effect on the shot cycle other than helping ease the working load on the 2nd reg

As far as the sub12 reg comes, they are the same reg and are restacked at the UK importer (sportsman gun centre) so in all reality it is unlikely to be that. my guess would be to restack the reg and make sure the rear reg is far enough out to show front reg pressure. 

Looks fantastic, be very interested to see/hear results!

Contact at @Jeffman as he makes them for Bagnals and he will ship one to you Pete

I was going to say I’ve got 3 barrels and probes for mine and none of them look like that, this said my delta wolf is one of the first high power ones they made lol

Crown's don't have a power plenum so to speak they have a slightly larger one in the late mk1's and the Mk2's but there is no additional power plenum before people start getting excited. The Crown is ok for power, but if you want real high power then you'll need to look elsewhere, the beauty...

None of my pellet probes look anything like that on my DW, what the hell happened to it!

Some do and some don't it depends when it was built. My .25 Crown in FAC has all the improvements of the mk2 but doesn't have MK2 engraved on the side, I've stripped it and compared it to a known pic block sub 12FPE rifle I have and it has the larger porting and plenum and the value changes -...

As above I have no issues with the Redesigns, I have over 100 tins of them! for my rifles, I just don't think they are the definitive best / most accurate pellet / calibre. My .30 and my .25 can be just as accurate

No I don't think there is a reason behind it other than the shooter on the day. If we were talking about 3-4 years of EBR all being dominated by .22 then yes there may be something there, but we are not. 

The only time that this might happen during normal shooting is if the state of the board is not reset during the cocking cycle, By unplugging the battery for 10 minutes you've essentially force reset the fire state. Cycling the safety usually resets the first state as well., an easy way to...

What a fantastic result for the Redwolf .22 HP! Great shooting by everyone involved :) Pete

I havent heard or seen anything about a transfer port even larger for the .35 slugs NSA supplies within the UK are pretty hard to come by and while I can import some from Europe it gets expensive with shipping nowadays! I'll ask around and see what I can find out!

Hiya, I dont know what the exact twist rate it, never asked and never really looked into it, but it is different to the normal liner. I haven't been able to get the 79gr slugs here, the only ones I was able to get a hold of in .35 was 93gr (if memory serves - I'm not near my stash of...

The power kit can be installed on the M3 (I have it bar the rubber ball installed in mine) and it gives plenty of power, we were pushing 40 grain slugs at 900fps during a test that Iwe were doing 2 weeks ago, 150bar on the 2nd reg and the new hammer and a weight from the slug power kit. All...

Yes I do, I got it from my late shooting partner @spray1mark, like Mark did I have an extensive array of various FX liners and bits and got one out of curiousity Only 2 were made that I know of so far (I am sure others have been made for testing etc but these are the only 2 I've seen or heard...

As above there are not widely available heavy liners right now, I have one in 800mm for my M3 but it doesnt appear to shoot any of the slugs I have tried (granted very limited availability in the UK) any better than the standard liner. They will be available more widely soon I am told. That...