Search results for query: *

The feature set, power potential, efficiency and configurations are pretty damn impressive...on my list...could be my first 9 mil. Good work RTI.

That's a lot of rifle for that scope! 🤣

Hello, Love this little rifle still! Looking increase plenum size on my old .22 Mutant standard. It came from the factory with a small aluminum spacer to offset the reg from the valve housing. I also think it has a step inside the pressure tube where the reg stops so probably limited to an...

It is actually a beautiful piece of lock work and leverage. Like a fine watch. Leave it alone and be happy but if your inclined and have patience trigger nirvana can be reached.

This

Thats awesome! Unfortunately the poor kids these days would end up with a SWAT team rolling into their neighborhood after some Karen called them in.

In my .25 I made the mistake of going higher on the LP (130 to 160) in relation to the HP (1400 to 1500) and could not get the results I was looking for. I followed your lead and dropped the LP down to about 105 and the LP to 1400 with a dwell of 23 and easily hit 890 with 33gr JTS's out of the...

Could be the poppet seal inside the reg as mentioned above on MFE 105. You can pull out MFE107 then pressurize and if still leaking its probably from the poppet seat per SKOUT or turn it in to reseat and then reset desired pressure. You can get 9006 apart but will need some non-marring plyers...

Looks like they still have them on..they are really air strippers due to the internall design. They do mitigate the report but not as quiet as some witth the felt liners, etc. There is room to wrap some insulation around the perforated stripper tube or put in their whisper baffles. Try one...

The settings are programmed into the EPOCH screen and can be adjusted from 10-50 in increments of 1 in program mode. The valve and transfer port are very large relative to other PCP designs. It seems to work well with their valve and flow design. I believe the dwell in this case is how much LP...

The LPR is what opens the valve under pressure from the HPR. Since its a balanced type valve it doesnt take much to pop it. The Dwell is the amount of time the valve stays open before shutting in milliseconds. This is controlled electronically thru the menu and can be adjusted from 10 to 50...

I was shooting into my rubber filled back stop and using an FX Compact chrono hanging off the moderator. I used the factory BC mentioned by Scout and few others to plug into Chairgun program so its ballpark. I am thinking about getting the Garmin chrono to better measure BC, etc. I live in KC...

Ok, got my .25 slug barrel installed. Set the regs to the recommended pressures HP 1750 (120 bar) LP 190-200. Seems to like 200 better. Out of the 25in barrel I am seeing around 860 +/- 3 or so with the 48.8gr slugs = 80ft/lbs. Retained velocity per chairgun with the slug ballistics at 100 is...

Got the Epoch .25 slug barrel kit in today. It is significantly beefier than the standard set up and pretty much fills up the carbon shroud it fits in. Comes with its own barrel nut and chamber nut to accommodate. The slugs are really really nice and well packed. Finish and form factor is also...

Excellent mags (.25) but the real value is if you get the sorter and loader combo. You can have 100 rounds ready to drop in during your shooting session. Quick to refill with the shaker dealio.

I should be receiving my EPOCH slug liner barrel today along with a tin of matched Corbin slugs. I stuck with the standard barrel as I like the current length. The SKOUT team has been great to work with and answered all my questions. Apparently it comes with a stronger HP reg spring but they...

Nice work!(y) Looks like that is on the Mac valve assembly. Once confirmed I would depressurize by firing off the solenoid so the LP side is at zero while not shooting. From my research NBR (black o rings) typically have better compression set resistance than PU O rings but may not be as tough...

It's actually easy to take apart and they have made some incremental improvements since launch. The regs come right out after degass, pulling the safety clip and unscrewing with a 5/8 socket on the HP and 3/16 on the LP. To get out MFE 107 it may be easier to unscrew the reg housing, pull out...

A call to Skout is a good idea but in the meantime try this or call Skout if unsure. On your HP reg remove MFE107 and the whole bottom end of the reg (springs, etc.) Leave in the reg body or put back in if you need to remove to get MFE107 out. Refill with air and see if you still get a leak...

22 ammo is made in the millions of rounds. No one said this sport was cheap but people pay for results/advancements and there is value in that if your into it. They probably don't even want to be in the slug business but decided it was the best way to compete at a higher level and provide a...