Search results for query: *

Good shooting! What's the details? Distance caliber ammo ect?

Hey know it's a long shot but looking to trade an almost new fk irons xion tattoo machine for an air tank. Machine has less then 10 hrs on it originally valued at $650 

It is pulled out so you can see the amout of thread that is left. If pushed all the way back in that position will give me the 6.5mm from the shoulder to the face of the receiver. Now if I thread it down to the end of the thread it will be going deeper into the receiver making my measurment...

So this is what my c1 looks like at 6.5 mm maybe only halfway down the threads if I screw it all the way down in a little over 10mm I pulled the reg didnt see any damage cleaned and relubed correctly stacked washers and its adjusting properly now!

Power plenum rod? Its whatever came on my mkii only thing changed was the slug kit parts and reg gauge.

Mine screws in too far. Meaning I would have to loosen c1 4mm to get 6.5mm

If so I had my hammer spring on min and screw was mostly out

I'm sorry whats hsp?

Ill try that. Is there any concern about the c1 measurment?

I degasses my gun turn in half a turn or so. gassed up gun was at 100 bar loosened reg goes up slowly I can hear air going in to plenum gets to 130 and pressure stops raising. I can still hear air going to plenum but no more pressure change brand new wikka guage.

Thats strange I havent tightend it really and always removed pressure when I did just a couple turns just so see if it was adjusting

Just installed a slug kit and I have several questions My c1 screws in pretty far Ernest video say measument 6.5mm mine is close to 10mm. Do I really need to back it out that much? Bofore I ordered this kit my regulator gauge wend bad not sure how but the plate with the numbers was loose would...

What's the going rate for a decommissioned firefighters tank? Found someone selling 45 min 310bar bottles no current hydro test but still life (08) 

Not yet but im definitely sore

Not for efficiency I was wasting alot of air but accuracy and power was there. But only having a hand pump at the moment I want to lean much more towords shot count lol

Took a couple pokes at a 185 had roughly 4.5 mils of some fishtailing wind. 301 is damn impressive! 

Got my mkii impact with power plenum shooting 33.5gn neilsens at 965 while trying to tune my rifle a prairie dog poped up at 130 yard. Ran the number through applied ballistics and dialed 3.5 mil in elevation and held .5 for wind. Landed a clean single head shot dropped him where he stood! I...

Yes an is great customer service. I have the kestrels 5700 elite with applied ballistics and I agree with everything said. But they are instead confirming the use just under seperate profiles. And also saying they dont preload custom curves for a specific brand of pellet/slug and weight like...

Intrested in what your muzzle velocity amd pellet/ slug you are using? Also scope mil or moa?

Thanks for the response everyone. I do already have one for my long range center fires so guess there's no loss there. After putting some numbers in mine it seems to be reasonable. Guess I'll have to test it when I get a pcp lol. I'm curious to what the reason it would be. Do you know if it was...