Search results for query: *

My Leshiy 2's 350mm barrel is etched just behind the threads at the muzzle with 'Alfa Precision' - so it is certainly marked. Perhaps they are not all marked like this?

You need to learn about trajectory and how it relates to optical centre over bore centre. Scope over bore height at very short range means you have to hold over quite a lot, and the rate of change for they measurement is very rapid inside the first 20 yards or so. One morning a few years ago I...

I drilled ALL ports to 1/8", including the hole in the aluminum part where it is at the upper edge of one chamber and the lower edge of the chamber opposite, whatever that's called - the 'block'? Also epoxy-filled the channel and second hole at the barrel port, slightly correcting the location...

I copied your picture, levelled it, and drew a line parallel to the optic rail and then through the optical centres. The dot sight looks fairly close to being parallel to the rail. The magnifier isn't anywhere near parallel, pointing upwards about 1.8 degrees according to my screen protractor...

For sub-12fpe it seems that going to the largest gets and around 80bar regulator setpoint would be sufficient. If not quite, then using a restrictive power puck. Or maybe those aren't quite enough still, hence the 'dogbone and collar'?

From what I've seen mentioned in this thread and in a couple of Youtube videos, the 'collar and bone' parts have been added to low-power imports in the UK, and perhaps elsewhere. Typically these lower power Leshiy 2 examples are in .177" or .22", but it could be there are other calibres where...

I wish the Elements base was a QD. Love my Burris one-piece QD bases for my TNW ASR and my Sig Cross. Makes it so easy to arrange bits in a backpack while hiking, and they return to zero very consistently on both rifles. Oh well, like I said the overhang isn't much, with the Leshiy now just 16"...

So you made the wheel with lever? Looks like a very finished product. My Immersive 10x40 (branded Element Immersive) arrived today. Had to knock out the two bolts on the smallest mount and tap them into the other side to get the knobs out of the way of folding the stock, while putting the...

Not looking for a $38USD part for a problem already fixed, but thanks anyway.

That's been part of what I've done since first trying, as twisting counter-clockwise would jam the roller/arm with even a small push. I'm trying the previous instructions, finding it awkward, as the tolerance on the shaft doesn't really allow for any play on an angle... but I'll persist and...

Will have to try that strategy, thanks. I've got ten little bearings on the way anyway. Something I throw into the repair/spares box and maybe never use, but maybe be glad I have some day.

Oh, I see! Nice, thanks. A quick search revealed the thread - https://www.airgunnation.com/threads/leshiy-2-indexing-wheel-upgrade.1268827/ - where that part is shown. I'll order some now.

By the way, I do have a question about the Leshiy 2. I've seen it mentioned in this thread, I think, and elsewhere besides - the magazine indexing guide roller (little lever with a spring, dips into the magazine hollows with every shot to keep it aligned) needs to be protected against...

Mine arrived today around 2pm. Spent a few hours tinkering, starting with a couple of shots across the Chrony F1 with the JSB .25" 33.95gr MkII pellets. Pumped it to 150bar. My first .25"! First shot was 818fps, and LOUD! Second was 796fps. I didn't feel like continuing, as even with hearing...