Search results for query: *

about 64 pumps to achieve 220 bars after starting from 140 bars for my huntsman classic (114 cc air tube) with a hills mk 3...completed in 2 phases.First phase 140 to about 190 bars...then air bled out.then 190 bars onwards.give about 10 mins between both the phases(can rebuild both the pump and...

here are some aftermarket options...are they really accurate than the stock gauge

my hills mk 3 started to pump back..so was forced to replace the last stage o ring.i have changed 5 o rings of the last or 3rd stage(see attached photos) all of which to me appear to be ok without any damage.wonder whats the reason for this problem.

where can a WIKA 250 bar gauge be sourced for my huntsman classic from?The current gauge as shown is about 23 mm dia with 1/8 BSPP threads.which will be more acccurate replacement pressure gauge..a HUMA Air gauge or a BestFittings gauge or a robert lane gauge ... all being offered in 23 mm dia..

compression?you mean inside the pump

i think you are right...this is the approx size courtsey the OLYPSYS android free app...0005 size is the nearest best measure.are these NBR 90?

you mean dash sizes 5,6 or 7?.a new o ring with me measure OD 5.85,CS 1.69 and ID 2.34 mm using a electronic vernier which frankly doesnt fit the dash sizes mentioned?

that link shows 6 sizes of O rings...which one is correct

Hi...any idea where can these green o rings be brought from...exclusively.whats hills calls Ring No 17 for the mk 3 pump.thanks

Alan..read your comments..i use a Hills Mk 3 to pump up my daystate huntsman...the method of venting air out after 50 strokes and then repumping...is this effective?i can strip and assemble my pcp myself with no problems but then how does one come to know ones pcp has moisture built up inside.i...

Daystate has updated their website with a WORKSHOP GUIDE section where stripping/assembling of current popular pcp models including o ring sizes have been mentioned.for info of all daystate pcp owners

Daystate has now added a workshop guide in their Website where they have provided detailed assembly and disassembly instructions for their current airguns including correct o ring sizes etc

any oidea where can one source the micron filter element of hills mk 3 pump..apart from hills themselves.i mean where its cheaper?

have pumped my daystate huntsman classic from zero to 220 bars once..after a rebuild..Hills Mk 3(still with me)

Does this apply for a Hunstamn Classic 177 FAC version also?

Correct method

Hi...brought a tin each of 16 and 20 gr HN slugs in 177 to try out...they fit in my daystate huntsman classic FAC breech when hand chambered but before finally seating inside the breech (while using the pellet probe) I feel a slight resistance in the last few mm of pellet probe travel.is this...

Daystate Magazine Spring...see this post in airgunforums.co.uk...might help you

ask Bagnall & Kirkwood thru a email...they might help.they have the best spares

Have used the blue loctite threadlocker 242 for assembling my daystate huntsman classic hammer assembly...no issues with that.