Search results for query: *

Thanks

Try a shooting bag its like a pillow for your butt. 

I have been using a CF shroud on my impact I didn't care for using the moderator end cap to tension it on and off every time. The shroud in the pic is 25mm OD X 14mm ID CF tube The end cap thread is 1/2 20 on both the male and female sides. Now I do not have to thread the SS liner lock into and...

Thanks for the tip. This meter has 4 individual range modes 30-90 50-110 70-130 and auto mode which is 30-130 for the test it was set to 70-130. I will test again when the weather is more inviting. mrbulk do you have any findings from your test to share?

The sound meter showed up today I took some time to get familiarized with the meter and software. this is the data we collected FX IMPACT MkII PP 700mm .25CAL set at reg psi 150bars power wheel set to max shooting 34gr JSB exact MkII (it should be noted as I do not shoot 34gr jsb at this...

Glad you guys like it. Thanks again to all very much appreciated!

Thanks for all the compliments guys! The insert I used is zinc coated steel ribbed rivet nut The local Fastnal didn't have SS ones on hand I may change them out to SS. I used a standard drill bit to make the through hole to the diameter of the screw then a larger bit to the depth of the...

I was impressed with the Saber mono-pod for the Impact the first time I saw it. Unfortunately the butt-stock has been back ordered forever well I finally had enough of waiting so I fitted it to the factory stock and it works very well I may not get the butt-stock the pod was designed for not...

After several messages regarding different components of the regulator setup I found my invoice from Nuvair. I am listing the part numbers for everything you see except the male QD fittings Hopefully this list will help save some time in your search. GB01-B 2.5" Pressure Gauge Lower Connect...

Im currently searching for a dB meter. I will post data we collect after testing both the dB and perceived by the ear. Stay tuned 

Right on thats right around where I'm at 150bar 36.2 nsa at 970 and 33.5 at 1020 Thanks I ordered the extension today it should arrive on Monday 

I would like to remove the shroud and use a CF tube to tension the barrel assembly. I did some testing today shooting no shroud straight off the barrel this thing is very loud. With the Ronin it is definitely more tame however it is considerably louder than the shroud and the Ronin. I can not...

The covers are custom made to order from double coated fabric comprised of a acrylic coated polyester heavy-duty marine grade material that is UV tare and milldue resistant. Avaliable in the gray you see in the pic along with dark blue similar to the blue of the logo on the compressor black and...

I purchased the tank with the compressor $500 it was a great deal because freight was already factored in. 500-550 is around average for the tank however its the freight that hits hard its about an additional 150 to 175 for shipping This is a good deal from a reputable company I spoke with them...

Thanks Knife! The inline regulator keeps the gun at very consistent pressure. When recording data and tweaking the tune fill psi is one last thing to be concerned about in addition when filling the gun I can simply open the valve and adjust the inline reg to exactly 250bars with no concern of...

I have a new setup I thought I would share. Thanks for the guidance and information from the members here on AGN compressor with new cover and storage cylinder. inline regulator for running tethered consistent bars hands free no more opening and closing the bottle valve just open it to the...

Like new DONNYFL SUMO .177/22 CAL No scratches like new condition. Barely used it on my .177 impact and changed caliber. $125.00 shipped to your door Thanks

I intended to type phase not single stage my mistake. Thanks for the detailed response 👍 

Hello guys I have decided to pull the trigger on a Alkin w31 auto single stage vertical. I have a couple questions regarding configuration and any suggestions from other owners. I am going to purchase the w31 with the auto features. I realize its not necessary however apparently the base model...