Search results for query: *

I appreciate the info. I have one on the way, going to use it with a Sinclar bipod. Hope it works out.

Anybody have a PQP rear rest? I'm looking for the minimum and maximum height from bench to the bottom of dog bone. Also the width of the bottom of the dog bone. Version 2.0

I talked to Darryl today also about .30 cal barrels. The way it sounds the are waiting for a shipment of .30 barrels due in anytime. I believe he said from LW. Guess they will have to test them before they let them loose. So I put an order in for a .22 LW. I'll get some hand on with it and wait...

How long is the length of pull?

IN

I'm right where I want to be, just looking to flatten it out

For all of you pro tuners out there. I'm shooting 10.3 grain JSB. In a shot string of 50 shots the 1st shot from the string is 884 then the 2nd goes to 893. Then it continues to decrease slowly to 872. Do I have a tad to much hammer spring tension? My transfer port is set pretty low. Just...

Unscrew air cylinder and remove from gun. Srew on adapter and fill. I believe the silver adapter came with my gun and i had to buy the brass adapter with the foster fitting to go onto it. Hope this helps.

You need one of these. Remove air cylinder and screw this on to fill with foster fitting.

IN

IN

IN

IN

What configuration did Martin and you come up with for a BR gun. What action, caliber? I'm thinking about one for myself.

Anybody try one of these scopes yet? I didn't find anything in the search.

I would suppose it depends on your storage space as to which model to get, horizontal or vertical. I have a vertical manual model and have no regrets. Easy peezy.

Anybody know if the .25 cal FX 34gr is the same as JSB king heavy or king heavy mk2?

You may have to back your HSP off if you installed the hammer weight washers to get your C1 to the correct 6.5mm. I just went through this.

Thanks for the help. I backed out the HSP screw until I was just getting movement on the HSP block with the power wheel from min to #1 setting. No more leaking. This all started when I installed the slug power kit. I am assuming that the hammer weight washers added preload to what I already had...

I was out shooting the impact today and when my bottle pressure gets down to about 175 bar air starts to leak when I open the bolt, from the barrel. If I recharge to 250 bar it doesn't leak until it gets back down to 175. Anybody have this happen before?