Search results for query: *

I had a very slow leak in the cylinder forever and finally sent to AOA. It came back today and seems to hold air now. However when screwing it into the action I now have a fast leak around the cylinder valve. I wonder if I can just replace the visible O-ring it seems straight forward (according...

I am also looking for an R7 stock and was wondering if it is possible to alter a R9 inletting to fit he R7. I would really like to order a stock from www.customstocks.com but they don't offer the R7. I assume the answer is know.

I followed the video instructions opened up the trigger polished it etc.. The 1st stage creep is gone but the trigger still only breaks at around 2 1/2 pounds. The sear screw was almost all the way in already. I like it much better now but 1lbs would be nice.

Excellent, thanks for the tip. Straight forward. 

I will try the sear screw next. I hate working on triggers. I rather rebuild a FWB 300 than messing with a trigger. Having said, is there a video or write up on the trigger job?

Will try that with my Cayden. The 1st stage is really gritty but the 2nd stage breaks clean. 

Thanks guys, the worst is that I can't try my Xmas present until next week.

The Hawke looks nice. I use the BKL on my heavy Springer rifles.

Well, the 2 locking bolt a part of the ring. I guess I could remove one with a file or dremel but I can get a new pair by Monday. Thanks

Well I think I just realized my mistake. I have a set of tactical mounts with 2 locking bolts. UTG e.g. only has 1 locking bolt and hence should fit fine. Really annoyed now I'll have to wait till Monday. Any recommendations for new mounts?

So I got the Cayden today and tried to throw a scope on. I realized that the rail in front of the breech is not the standard Picatinny rail spacing. I got a basic set of rings with 2 fixed locking bolts which won't fit. What am I missing here? I used plenty of P. rails in the past.

The HW100 FSB is the only PCP I kept over the years. It was tuned (think by Allen Z.) get's 80 shots and has an insanely good trigger. Off hand balance is not as good as some of my heavy springers. I got a Benjamin Cayden (just to see what all the talk is about) on order and I am thinking it...

I got one on order for $430 may have to return it with Prime

thanks

anyone know where I can find a 3X9 Freedom EFR? all I found was Midway - blemished for $349 

Leupold 3X9 EFR in gloss, matches the Pro Sport perfectly. I think I used Accusport or RWS low mounts.

Ok, thanks. was a bit confused since they don't have medium mounts. Will get the low. Now I need to get a scope. just realized that I don't have anything lying around anymore. Tempted to get my favorite Leupold freedom 3x9EFR but they are as hard to find as most scopes that are recommended...

Thanks for the photo and the info. Looks like a beauty. I looked at those rings. Was going to order Leapers or accushot in Medium and High. Looks like you still have a bit of space between scope and action.

Lot's of good info, thanks guys

First time poster here. Used to be a regular on the Yellow Forum several years ago. I just decided to get back into air guns and ordered a Cayden. I was wondering how loud the gun is compared to e.g. HW97 or TX200. Does the noise level come down if you shoot with reduced power in the backyard or...