Search results for query: *

It's almost May......is there anyone who owns a pro by now?

I'm sorry but that plenum looks way too big for that gun. There goes that sleek design... Next thing is a gauge on the side to tune that gun. Would be fair from FX to use the right pictures on their website.

nope, according to fx site the 700 classics come with a heavy liner

As far as I can see, the drs classic has more power. With the .22 700mm barrel they give a max of 119 joule on the classic, where the Pro has 97 joule with the same specs.... All according to Krale website. FX took the classic powerspecs offline. The classic does not have a regulator manometer...

Sounds very familiar. Same thing happened to me when I posted a video of Bill Lepage shooting at 500 yards with his Panthera. Somehow after hitting a few rabbits, Steve thinks he is the allmighty and best shooter in the universe. And the day he got a chrony, he became a ballistic specialist...

You mean micro at 4. That is maxed out. Macro wheel really says nothing. You could consider a tungsten hamer. Your settings at micro will then be about 2. Just don't overdo the hamer if you want to keep that valve in good shape.

It all depend on what you will you will be using it for. Take a look at Delta.

I use Rhino3D mostly. Only use bambulabs x1c's since half a year. Nothing beats that for under 2000 per machine. PETG, ASa or carbonprints are just fenomenal. For example this Carbonfiber PETG silencer is 165x40mm and weighs only 78 grams. Just as quiet as my donny Ronin that weighs 300 grams...

Yes it does. There is an upgrade for a thicker oring in the valve cap on the front. The valve cap also has a bigger chamber for that oring. The new oring takes a bit of the speed because there is more grip and tension on the valve. About 10 to 15 fps. A polished valve seems to help a bit.

is the transport screw on the right beneath the magazin entry removed? There should be a hole visible to the other side? Where did u buy it?

I'm glad I changed this. It's shooting a whole lot better and the gun is more quiet. It's certainly not useless. We (9 panthera/king shooters) shoot mostly 34 grain H&N .218 that perform best at 1010/1020. We have tested this at different pressures and speeds beginning 2023 indoor range at 100...

I have set the reg pressure at 160 bar. Hammerspringtension micro is set to 2.1ish and produces 1020fps very consistantly. Twice the weight seems to be half the Hammerspringtension. I started from 740fps and worked my way up slowly to 1020. I always had that hard ping.. now it's a dong :) Shot...

all panthera's after may 2023 have a carbon sleeve. You can check it bij removing the shroud, the spacer at the front of the barrel and pull out the liner. It will probably come out together with the liner.

I have two .22 panthera's and a king. The panthera's are 700's and the king is a 600mm. The thing is that my slugs perform very well in the panthera's at 1020fps on 150 bar, hammer 3.7. The King was set to 155 where the hammer was maxed out at 4 to achieve 1005fps with 34 grains. So more...

Besides the grain or caliber one is shooting. The thing I meant is, what's the difference on impact on the valve when you have both hammers hit it to produce the same power? You would have a lower setting on your dial with the tungsten, and a higher setting with the 8mm. Same force that hits the...

Would the tungsten hammer work with the stronger valves at all? I mean, you could have the hammer tension at a reasonable setting and not drive the hell out of it? Would there be a difference in using an 8mm or a tungsten and set it to lets say 1000fps ? again, most replys are from beginning...

Had some great results today. 990 to 1000fps at 155 bar 34 grain .218

Yeah. Horrible quality. Worst groups I have seen in years. An absolute waste of less money.

We, a group of 6 panthera shooters, have all the .22/700s set now at 150 bar, with the new heavier valverod upgrade. Hammer at 3.1ish. We have tried all pressure setting combined with hammer settings. 150bar seemed to be the very best. External bottle pressure regulated at 210 bar. We use H&N...