Search results for query: *

I’ve had a .25 impact for years, competed with it at the PA cup and did quite well (for my first time scored a 220). I bought a conversion kit to .30 and I can’t get JSB 50.15, AEA 45’s or ZAN pellets to shoot for nothing. In .25 it would shoot a full magazine into a group at 65 yards all...

Appreciate this community and all it’s done for me. Wanted to share a recent Sekhmet expierience as well as long-term, as I’ve read some not positive experiences here. Recently I purchased three Sekhmet Gauges. A 25mm Gen2 standard and two 28mm Gen2 DPG Pro. Following my order Nicole from...

Dreamline .25 with the 380mm/395mm (whatever it is) superior standard liner. Screenshots are from JSB King 25.4’s. The first shots (around 12:37) were when the tank was full 250bar. The last 10 or so shots (around 12:58) were the last shots of the fourth magazine. 64 shots on a 480mm bottle...

Added a 700cc bottle from alsafe. I get 62-63 shots on a fill @ 85ft/lbs, enough for two magazines. $180 for the bottle and $60 for an FX valve. Bottle and valve are rated for 300bar but it’s an MK-II so I’m still filling to 250. the weight balance is now almost perfectly distributed front to...

Looking for a Slug A liner in 700mm .25 

Use my Impact for shooting 38gr NSAs usually. So I have just about all the power mods installed. It shoots great but the spacers that come with the slug power kit make the gun feel a bit over powered. Can hear the hammer smacking that valve. Took both hammer spacers out and put in the Huma...

Just curious if anyone has found a manufacturer that makes non HP slugs for target shooting? I just found those Altaros slugs. that’s exactly what I’m looking for except those are nearly 50gr. The BC (.21 G1) is double the NSA 34.9’s and 38.9’s I shoot. Realize the HP is why. That’s why I’m...

When I tighten my C1 (it came loose) it sticks out less than 6mm. 5.7mm to be exact. Is there a better way than just using permanent loctite to “set” the C1 where I want it? Gun came with the C1 loose and I’ve been fighting with it since. It’s a .25 Impact MK-II setup to shoot heavy slugs...

Anyone know the size of the o-ring glued to the outside of a .25 16 shot wildcat/dreamline magazine? Mine fell out of one of my magazines and it’s a pain to measure with calipers. It looks like maybe 3x1.5mm or 3x2mm?

Got a brand new Impact. MK II with power plenum. I noticed as I’m shooting that velocities are dropping off slightly, then more. I’m talking almost 200fps. 950 to 775ish. My spread almost 50fps out of the box. Hmmm... I found the problems. Two of them actually. First, the reloading bar is...

Anyone had hammer adjustment creep? Shot a mag, was shooting at 935 (normal for my tune) by the end of the magazine I’m shooting 900-905. Seemed odd. This is a fairly new gun, so I’m still getting used to it but I have several other PCPs that haven’t done this. I checked my hammer adjustment...

Someone here recommended a silent thunder ordnance Sarissa to tame the bark of my FX dreamline. This same user claims the Sarissa was quieter than an emperor. I don’t doubt him. With the factory Donny FL my db meter registered 106-107db which was just a bit too loud for me to be comfortable...

Title says it all. Looking for an FX pocket chrony willing to pay $150

Has anyone tried the pin probe from huma for the dreamline? I’d like to try one but $50 shipped to the USA seems steep for not knowing what the results would be. Most of that cost is the shipping itself so I’m thinking of waiting until they make it to dealers. I’m already using the tuning...

My dreamline is loud even with a moderator. I have a standard DonnyFL FX that came with my dreamline and a DonnyFL Sumo .25/.30 the sumo is substantially larger than the DonnyFL FX and also slightly louder actually. I think due to it supporting .30 and having a slightly larger opening. What...

Broke my valve pin. Serial number is higher than 0101759 so I got the pin 20153c-1 and seat 2024c (just in case). I put the seat and pin in and the gun leaks. I have the seat in the correct orientation to the pin and I put the little top hat back inside the valve cover and aligned the spring to...

29gr .25 HS HP labeled box. In case anyone is wondering what the expansion looks like on a Nielsen slug. This one was pulled from a soaking wet pine tree. So fairly soft wood. Probably an extreme example of what these slugs are capable of. 850fps and 40ish yards

I think the title says it all. Looking for a Barrel kit for dreamline. 22/600mm. If in good condition would pay retail $300

dreamline .25 with power plenum and superior liner. reg@110-115. hammer on max, and allen adjustment near maxed out. fx hybrids and nsa 26.8’s running 890-900fps. just put about 30 pellets and 70 slugs through the new superior liner. 50 and 65 yard groups got better as i shot. 1” to 1.25”...

When adjusting the hammer spring tension is the setting at the top the setting it’s on? The gun came with max on top. Thanks!