Search results for query: *

Before I start this may or may not work for you. Use this information at your own risk. So I have long struggled with my Benjamin summit being too muzzle heavy. I love the gun this was my one issue so I corrected the weight today. I discovered the rear of the stock was hollow so I tried a...

Oh I always use pellgun oil

I found today that I can pull the bolt all the way back and pull the trigger and this combined with the use of a screwdriver to snug the cap as well as possible makes a much larger hole in my gun than without this method of charging the 2240

A sidelever bullpup with a high quality gas ram in .25 capable of the accuracy of a PCP with minimal recoil and a multi shot design with a decent 10 round magazine producing 20+ fpe and weighing just six pounds that would be my dream lol

I have a Benjamin summit np2 which is basically a trail np2 in a different stock and one of the things no one tells you is that with the NP2 it tends to do best with your trigger hand tight on the grip with a sling attached to the mounts and you pulling the sling towards you with your arm inside...

My fascination started with my grandpa's ancient daisy buck and many an hour spent mastering it. I sent probably twenty big containers of bb's through that airgun and then I got a daisy grizzly and my older brother would go into the local store and buy me a box of pellets in the cartons on my...

Since when did the UK start issuing invisible body armor to rabbits

Thanks I am actually planning on using a pro top for the valve as it is a self piercing valve so you can pierce the CO2 cylinder without using the hammer

I got bored and decided to modify my 2240. This has been an ongoing project....here are the results. The only things I have left are a 18" barrel and a discovery stem and valve body with a special valve

Hey everyone I just got a bargain on a center point red/green dot sight at a local pawn shop but it didn't include rings. So I have tried 25mm rings like the lady at center point customer service recommended I had some laying around but alas not the right size does anyone know what size rings to...

Most fun for the money is going to be my standard and for that I would have to say that it is a tie between my two favorite airguns the Benjamin summit np2 and my 2240 "low drag" carbine. The summit My 2240 "low drag" carbine

I did something similar with a bucket and it works great mine allows me to shoot my Benjamin summit np2 anytime I wish.

Well my 2240 is my confined space hunting airgun. And then I have my Benjamin summit np2 .22 it is my target rifle and long range hunting airgun.

I have a Benjamin summit and I was wondering if anyone has ever retrofitted a sbd silver, with the sbd gold or even went to the extreme and put a sbd platinum on it and what difference it would make.... I know that it is not that common probably so also was wondering if anyone has tried...

I have found my summit does extremely well with the crosman pointed pellets out to 50 yards so far consistent hits on 2" steel target with 4x scope I am going to setup a paper target next time I go to the orchard and see how they group at that distance I have been using chairgun to adjust my...

Does your model have the barrel end sling loop most do have them and it makes a lot of rattles

I usually take it a step further and put a whole 500 count tin through mine before I put a scope on and I do it rapid fire lol. As fast as I can into the mulch trap. Then I redo all the steps again lol. Also I loctite all of my stock and scope screws. And I always run my guns through the local...

I may have to give all these suggestions a try and find what I like best

Ok sounds good I will definitely give it a try also I might get some better domes to compare results.

I have found that my Benjamin summit np2 shoots the crosman pointed pellets as accurately as the crosman domed ultra magnum pellets and I noticed the better b/c having a far better trajectory. Are there any brands like H&N, Predator, or JSB that make pellets in the 14 grain range that may prove...