Search results for query: *

It’s simple, I have the same setup (M3 sniper .22) and to reach the same speed of the 18gr of Steve tune (86bar) I only need 70bar on the second reg, 15bar less! 😉

Hi Steve, thanks for your vids and all the informations from pros! you don’t speak of the QTS best zone between macro and micro, will you give more info about that?

If Steve has validated his theory… that will tell you something, the couple power wheel adjuster / quick tune system is not reliable! Whenever the setup is set between 1 or 5 on the QTS, the hammer should be stable on all the range, seems that is not the case..

I think that this tuning guide will be really useful because I’m a bit lost.. I don’t know where I have to start.. reg pressure? Pellets best speed? If this theory of searching the best PA zone is true, you need to know the best pellets speed before doing this 80shots test? What I have done...

Hi Steve, Just received my new M3 😝 and waiting your tuning guide! 😄 I have two questions for you if you have a bit time: I saw in the owner manual the recommended pressure for the second regulator, do you have a idea why the .177 need more pressure than the .22? Second one, i had ordered...

Hi Steve, see on Instagram your last post but i asked myself a question.. are you sure that you have a barrel tensioner on this M3? I saw a shroud on yours.. and in all other videos where i saw a barrel tensioner, there is no shroud but just a carbon exterior thin tube with a special nut at the...

Hello Steve, Hello Steve, I was always thinking that the sweet spot pressure between two reg was 25/30bar, did you have found best results pushing it to 40bar? Thanks for all your informations and knowledge 😀🙏

Hello Steve, Nice video! Thanks for it Why have you choosed the fx hybrid slugs for the 100yards range? jsb redesigned looked really good too with this setup, have you try them or another pellets at this range? thanks!

Hello guys, do you know if there a air-Venturi dealer for Europe ? thanks! 🙂

This shooting was on the floor with a bipod. I can understand all I had read here and what you say it’s right if you want to compare you need to have a « protocol » but I didn’t compared pellet vs slugs, I’ve just compared slugs @40m vs slugs @50m+wind. The day I had shoot @40m I had great...

I’m not a great shooter too, I’m a beginner in shooting but if the groups are bad at 40 and 50m, Finally it’s a bit better with slugs. 😆

The end cap of the moderator is already drilled, I will try to make a bore guide to check if the barrel is center or not, it’s a good idea 👍 Thanks you

No tuning, same airgun, same power, same slugs, same shooter 🤔😐 The pellets groups was just horrible today.. I shoots Jsb hades 16g and Jsb exact 25g and all impacts was far away from poi (+/- 10cm) and the groups extend to 10cm too 😟 Hades: Jsb exact 25g:

It’s funny but yesterday was the first time I try to shoot slugs, I shoot at 40m, the weather was calm and sunny and this is the result of the H&N slugs 21g: but today... i retry to shoot these slugs but at 50m, it’s very very windy today, and : So I don’t know what is the conclusion...

Today I retry to shoot the H&N slugs 21g but at 50m.. and oh! Surprise! I have better groups than the JSB exact 25g?! 😯 5 shoots each and in the first paper there is 2shoots in the grey zone, hole in hole. So I don’t understand what was happening yesterday but it’s look like that the...

The finish of the slugs is nice.. but it will be awesome until you have the right barrel for it... or a slug liner! My Umarex Reign don’t like them.. and i can make them fast enough with my 60joules power, just 258m/s..

Hello, I have try slugs on my umarex Reign .22 fac and the results is the same like you.. can’t group anything with slugs.. I try the H&N 21g and the Jsb knockout 25g but the reign can’t make them more than 260m/s that is not enough for a slugs I think. H&N @40m 5shoots.. 4find.. Jsb...

Hello, I have some news with my moderator, cause of the covid19 I can’t send it back to warranty for the moment but it’s waiting there.. looking at me so.. I have try something! The umarex neo k3 moderator have 3chambers inside, I dismounted it and just get off the 2 plastic separation inside...

I’m still waiting a answer guys 😄

Hello guys, I’ve just seen the new video out from AAR on YouTube that review the FX impact x & impact mk2 without power plenum. https://youtu.be/MUfYWPjlpO0 In this video Andy dismount the original silencer and... it’s empty! Then he compared it to the donnyFl sumo and said that there not...