Search results for query: *

Thank you all for the info! Yes, manual actually does list most important o-ring sizes. Never thought of RTFM. And thanks to @heavy-impact for making the list and posting it here which I did not find wile searching. My searching skills, obviously, could get tuned up just as an air rifle can

Hi all, I'll be playing with a regulator pressure a bit, can't get 25 grain slugs to fly consistently faster than 940 FPS and reports have it that those are most accurate between 960 and 980, some well over a 1000 To change the regulator pressure whole thing has to be disassembled since reg is...

Thank you all for the info! You've gave me enough options to get started.

Hi all, I just bought Vulcan 3 and it has quite a decent length picatinny rail under the fore stock. Since I already have a tripod that accepts Arca rail, I would like to use it with Vulcan too. Are there any Arca rails with picatinny clamp that I could attach to the Vulcan but one that would...

Received: finally I bought a better quality SPL meter. 20$ one I had for years finally died. I design and 3D print my own moderators and although mostly successful, it seems that Epoch is tough to quiet down to my liking. Ordered: digital pressure gauges for HPR and LPR on the said Epoch I...

The endcap is aluminium, only plastic parts in the moderator are machined delrin baffles. Since clipping occurred on three different rifles I presume that something is out of alignment on the rear, threaded part of the moderator I'll check how does the rear part alone threads on the barrel...

Few months back I've bought Hugget Astille extended version (.25 cal) in hope to use it on two .25 cal air rifles Since it has a specific shape and I needed info on dimensions, prior to purchase, I've contacted Hugget via email and got quick response and answers on my emails When I got the...

I have followed this video from EagleVision: It is glued on hard and I had to use some force to get it moving Another issue is limited space to grip the lens so a decent quality needlenose pliers are a must

Thank you for the info!

@Centercut could you, please, share the size of the x-rings that you've used for sealing digital pressure gauges I'm waiting for mine to arrive so I would like to prepare correct size orings Thnx! Walt

I have 3 liners kit. To get LP to around 150 PSI I'll have to adjust it separately from HP because if I crank HP so far high that LP get to 150 PSI it will shoot well over 1100 FPS. I have no problem in cranking LP up separately, I was just under impression that it shouldn't be done since...

Do you by any chance have recommended HP/LP and dwell settings for 35" barrel in .25 cal? I'm still trying to get the 35" barrels to shoot with good accuracy. groups fall apart after 60 meters whatever I do. I've shot with various pellets, speeds from 850 to 1050, played with dwell from 18 - 23...

I have one imperial size thread gauges but it too big in size to get it into a 1/4" hole It's for outside threads only I'll have to get one of these "Nut and Bolt Thread Checker" gauges sets

Thank you all for the info!

Sorry for my ignorance but since I'm from Europe I have no easy way of checking this. What is the thread/bolt size of these holes? I plan to design/make some kind of monopod so I need to know which bolts I need to order. Thank you!

It shot like a shot gun, 10-15 cm groups @30m Unacceptable for 3600€ air rifle

I've been shooting 850-900FPS Those speeds proved best from the 25" barrels

Few weeks ago I found that finally barrel insert kit can be bought in EU. Since mine is 25" barrel, I have ordered 35" barrel inserts and a shroud. Got back from a vacation and finally got a chance to shoot 35" barrels. Unfortunately, it was a huge disappointment! Groups are terrible and past...

Haven't been around for a few weeks. I've received the missing battery holder tab and an extra battery. Great CS! Thank you very much Darryl!

Did you post your issue in a wrong thread or just decided it's ok to hijack the thread for the fun of it?