Search results for query: *

Hey folks, So I got the fx no limits mounts and cranked the rear up enough so that I have 40 MoA left to dial up on the turret plus the reticle gives me another 32 MoA. StrelokPro tells me that’s enough for 200m if I can do my part. Thanks for the assistance everyone! Sam

Thanks a lot guys. I’m gonna get the FX no limit mounts. I’m new to serious airgunning and I’m loving the technical aspect of it. I don’t know how I would have sorted out all my issues without all of you on this forum :) bit by bit it’s coming together. Can’t wait to stretch it out...

Hi, I have an FX Crown .30 with 600mm barrel. It’s shooting 44.75g at 850fps. I put in a Viper PST Gen 2 5-25x50 with Warne 216L extra high mounts. I tried to zero the scope at 30m and it needed 39 MoA of elevation. Is that normal? The dial doesn’t have very much more elevation adjustment. 

So slight update. I turned the ref down to 140 and set the hammer spring to max. Took out all the slack. Shot a few pellets and got 740fps average. Tried fiddling with the power wheel and at setting 2, I started getting 840fps. Shooting quite tight groups at 30m. Ran into an issue zeroing the...

My manual says it goes to 160 bar but then below it says not to increase it past 150 bar so not sure ?

Thanks. The crown came from the factory at 147 bar but the hammer spring tension was too low for that and was getting low 700’s FPS. ive increased the hammer spring tension now getting High 700’s but I suspect that the reg pressure may be too high. I’m gonna try backing it down to 140 bar...

Thanks! I’ll try this. Quite excited to get back to my yard and start plinking away ;)

Wow! That was a lot of info and a lot to digest. I’ll work on my crown and report back, hopefully with better results. Has to be said though, at 30m even with this FPS, it is very accurate. thanks for the advice! I really appreciate it.

Mine is set to 147 bar with maxed out hammer spring and I barely get 780 FPS with the JSB 44.75g pellets. Not sure what I’m doing wrong here.

Hi, I just got a Crown .30 with 600mm barrel. The Reg was set at 147 bar and I increased the hammer spring tension to 15mm. I’ve put two tins of JSB 44.75g however, my FPS Is really low. Here’s my last shot string as measured by the FX wireless chrony Shot count: 6 Low: 759 Hi: 835 Avg...

Hi, I recently bought an FX Crown .30 with 600mm barrel. I’ve been shooting 50.3 and 44.75g JSBs. I’ve put a tin of each through the barrel. Cleaned the barrel today (was filthy). today I tried to benchmark the rifle with 44.75g JSBs. I’m using an FX wireless chrony attached to the barrel via...