Search results for query: *

Does anyone have a list of o-ring sizes for the BRK ghost? All I can find on their website is the exploded view diagram. It calls the o rings out by number but has no corresponding size references. I know there are "kits" available with all the o-rings, but I'd like to buy my own and...

I had a chance to install the freshly cut barrel and probe into my Ghost. Since it was last tuned for .30 pellets, I turned the power wheel (hammer) down from 12->7. I was so excited to see what it would do, I didnt bother breaking out the chrony. I just loaded up some JSB redesigns and let...

While Im waiting on a 304 stainless rod to arrive, I roughed out a trial probe in aluminum. Im experimenting a bit with the probe length. The factory BRK Ghost .30 probe didnt seat the pellet fully into the rifling. To test, I loaded the pellet using the barrel/probe installed in the gun...

Next step is to move over to the mill to machine the flat for the set screw and open up a transfer port. Due to the stick out, to reduce chatter I supported the end of the barrel. Transfer port was cut to similar dimensions as my .22 FX barrel. I skipped a picture of the process, but you can...

I figured I'd share my experience machining up a LW barrel blank to fit my BRK Ghost. There are some good videos on youtube but not many that cover airgun barrels on hobby grade machines. Starting point: BRK ghost .30 cal. Objective: machine a .22 blank and the .22 probe. First a few pics...

I already have an FX pocket chrono, and a ProChrony. They work fine to tell me my muzzle velocity. The value they provide -> velocity & reg tuning. Power verificaiton for FT and EFT. Benefit of the FX True Ballistics chrony: 1) Provides actual average BC based on my equipment, pellet...

Im wondering if a Lab Radar chrony might be able to solve a problem Im having. If anyone has experience with this, please chime in. Question: Specifically, what I want to know is -> Does the multi-BC function in Strelok have a significant impact on accuracy of the trajectory data? Ive...

I finally jumped on the slug bandwagon and boy did I spend a lot of money for some terrible accuracy! Can you validate if you're having the same experience? Or if I'm missing something, I'm happy to hear any suggestions. Summary: After some pretty extensive testing, the best slug groups are...

On my MK1 and MK2, the reg pressures were set around 140 - 150 bar. On the new MK3, the second stage is set around 90 Bar. The first stage on the M3 is at 150bar. Im wondering what the difference is that allows the M3 to get power at low reg pressures. If I set my MK1 or MK2 to 90 bar, I...

Just sharing some pics from my recent service on the old yongheng. It was taking a bit longer than usual to fill my tanks. Usual top off from 3k to 4200 was about 20 min. Recently it's been taking about 30. There was a bag of orings and seals in the box when I got it. Sure enough, it had the 3...

My YH is getting a bit slow on fill times so I figured its time to replace the HP piston rings. Instead of struggling to get the new seals in place I figured it might be best to just order a new piston assembly from eBay. The eBay listing specifically said this piston assembly is for Yong...

I'm sure this is user error, but can anyone tell me how I can view posts in chronological order? Its tedious to have to open each category then back out and do the same for the next one. Thanks, Brian

Hey all Just some info sharing here. I have an Edgun 3RM that I bought new several years ago. The rifle performed very well but it never fell into my "daily driver" slot due to the the rear cocking functionality. After I put a few tins of pellets through it ( a couple years after purchase)...

Just curious on your thoughts here. Everyone has different benchmarking and expectations. It seems most new high end air rifles shoot pretty dang well out of the box. Most of my rifles after tuning & pellet sorting will do about 1.5" at 100y. Sometimes better, but I have none that will do...

AoA is out of stock. Hoping to find a pre-owned programmer. Let me know if you're willing to let yours go. Thanks Brian

I had some aluminum pipe laying around so I drew up a monopod buttstock for my impact. It's printed in high strength resin. I think it turned out well! Along with the accutac bipod, this sucker feels like it's in a vise.

Hi all, I'd like to share some key info that may not be common knowledge regarding HP air filtration. It seems most of the posts I've seen on here regarding filtering best practices are missing something very important....need for a PMV! Key Point: Most of the moisture removal in a proper...

Purchased an Impact from Jim (Jimmymeyers). Rifle was packed well and shipped right away. Pictures and description were accurate. Tracking number was provided and great communication. Would gladly do business again. Thanks Jim!

Yen sold me a Nightforce scope. Clear and accurate description. Great communication. Deal in confidence! Thanks Yen

I'm prepping a .177 regal for HFT. Until I can machine up a more permanent solution Im looking for a good way to mount a feather string to the barrel as a wind indicator. I want something that's foldable so I dont rip it off and ideally with a removable string so I don't have to wrap it...