Search results for query: *

Was about to shoot my Maverick over the chrony, having just topped it to 250 bar, the Omega bottle max. When I picked up the rifle I saw the pressure needle at 265... then 275, then 300, then ... Removed bottle, degassed plenum and held the rifle at different angles. The dial face just spins...

Sharing the custom rail I made for my Bullboss from a blank. 2nd one I did, first was too low. Will tap in another screw later so the rail has two points of contact to the action block. A step-bit was used for the counter-sinks. M4 screws, 20mm long. Normally I use black but all I had was...

Anyone have the annoying issue where the bottle intake housing rotates since it isnt under pressure and cants the bottle to the side since it is off-set in which the rails then shave it like a razor??? There needs to be a bottom flat spacer to keep that from happening. Boo-Hiss FX.

For my Maverick I got the Universal Saber Tactical rail. Totally happy with it, and found these nice covers that slide into the side M-Lok rails for a better feel. Even BeTTeR! They don't really 'lock in' fore/aft but do stay put just by using it. I slid them with gentle light force slowly as...

Found a never used, still in bag Wika Mini 28 250bar gauge. Threads are G1/8 bsp. From Huma air. Has 2 o-rings in bag. $39 [now $25] shipped CONUS USPS with tracking. Paypal only. PM me here about it. - David Richmond VA

My project gun is a used Bullboss, .25cal. After much modification later, I have it shooting and holding air (unregulated). I did want to 'lock in' the spring tension as there is no real way to index its placement being inside a free spinning hammer. [I could never tell if I was turning the...

My new Maveric VP 600mm .25cal incoming from SPAW has a 13g weight as per an email from Ken. I'm fine with this I guess since I intend to use 33gr slugs or so but isnt the stock weight 11g? What is the weight of the power kit [hammer] then or are there other differences in that? No extra...

Anyone know a place to get an extra quick-connect probe for the XM1. The Umarex AirSaber probe looks identical just in dimensions but not sure of the diameter? It is $35 shipped from Umarex... Silver is AirSaber the brass is the XM1's

So for BlackFriday I snagged 2 scopes for the .22lr Savages my boys have. I wanted focus of at least 25 yards. I found these 3-12x Vector's on Dvor for less than $50 each, shipped free. They look well made in weight and finish, adjust down to 10 yards with a forgiving eye box to 10 power just...

So my old NiteSite battery has always been a bane of my shooting after dark moments. I had a setup for a while consisting of zip-ties and electrical tape to attach it to the railing of my Wildcat. I sat and finally tackled the issue. Took apart the battery case and saw where I could drill and...

So a raccoon (well 2) has been pestering the frogs and fish in my mini 10 foot pond. Wife doesn't like idea of those trash pandas around and he was getting bold. Plus disease threats, I say only thing a raccoon is good for is to another raccoon, cute ones on YouTube not withstanding. So I set...

This may be old news but I looked for info on what .22 Wildcat users had for velocities on a Huma regulator. All I saw was .25cal info. I have NOT adjusted the hammer spring yet. On 18gr JSB: 125 BAR yielded 886 max, 31.5fpe 120 BAR 881 max, 878 avg 31.1fpe I have not tested for shot count...

My personal experience with Lethal Air in Richmond Virginia has been nothing but a runaround. The guy just runs a hobby shop but is never there and does not treat anyone professionally. Case in point, he had my Wildcat for over 3 months to have a Huma installed. He told me he was going to...

I got this and like it. Does calculations for you as opposed to writing things down. Create files to your own liking. 130 BAR HUMA in a Hatsan Bullboss with 33gr JSB. Still messing with tuning hammer spring. Does audible announcing of speeds by default, I turned that off. The display is...

The supplied degassing tool I have is too large, the threads wont even touch on the end of the valve stem. I cant find them online. Hatsan BullBoss QE long tube

The Donny Emperor V2 .30 I tried is too much for what I need. I mine is a custom 9.5mm opening with an 11mm cap if you want that too. 1/2x20 $175 shipped ConUS (lower 48)PayPal only. Seen next to a Shogun.

Ok, first time user of any mid priced PCP. I have owned a $2,500 Daystate and a FX Wildcat. Each were radically different in design but both very precise in form in their own right. I bought a used BullBoss by Hatsan to try out in .25cal to see what the fuss is about. All I have shot before...

Should put this under Projectiles: So got a new-to-me Hatsan BullBoss .25cal. I get all giddy, check it out and had unscrewed the cap cover to the QE at the muzzle to put a Donny FL on. I cock it, no magazine, safety off....pull the trigger...BLAM!! Something shot out! I have this...

Got a Hatsan BullBoss from 7Weight. He was quick, honest, gave pics and kept me up-to-date. Great seller.

If a regular is required to breathe then why all the trouble cutting the threads of tube cap? Why not a hole in the tube behind the Huma??