Search results for query: *

$0.02

Actually, I needed to update this post, so now is a good a time as any. Over the past 48-72 hours, air loss has been almost non-existent. My conclusion is that the bleed screw had somehow started to allow air to escape; not much, but noticeable over numerous hours. I took to unscrewing the...

An update: After re-seating/re-tightening the "bleed screw," I am seeing a slowing of the leak process. Having said that, I admit that I have not had the reservoir filled up to the level at which i previously experienced the 100BAR drop in three hours. Still, I am hopeful that further...

@Odoyle: That sounds like a reasonable next step should my efforts with the bleed screw and fill port not reveal anything obvious. Thanks again.

@Odoyle: Thanks for the additional guidance. So far I've simply opened the bleed screw, draining the reservoir. I've tightened the bleed valve and now am in the process of refilling the reservoir, by hand of course. I figured that such an effort, along with the fill port, would be the...

Understood; thanks again.

Yes your bleed screw is that flat head slot at the gauge. Thanks for confirming that. "...look for the leak at the air release valve" For the sake of clarity, the "air release valve" (as you call it) is NOT the same as what I refer to as the "bleed valve." Ia that correct? Thank you.

Good day all: I have a Hatsah Flash QE in .22 that recently started exhibiting air loss while at rest. It has not been modified in any way, and the only recent "change" is that I had to let it sit untouched (and at between 100 and 200BAR) for about 6 weeks due to a medical issue. Upon getting...

268.11

785

If I can't trust a company in small matters, I probably can't trust them in larger matters.

UPDATE: Single tin of JSB pellets arrived. Here's how things look. First, the packaging: a single "Padded Bubble Bag," large enough to contain the tin (but just barely) but not protect it. Second, unopen tin was damaged on two sides. My guess would be that at least some of the pellets also...

Update, but first a review: April 22 - I placed an order online April 22 - I e-mailed an update to my ship-to information April 24 - I e-mailed requesting confirmation of previous e-mail with updated shipping information April 27 - I e-mailed again, now requesting both cancellation of order...

@Chunky_Munky: All my experiences with PA have been positive (and I'm not getting compensated in any way to say that). When I called last week, I was told they were seeing a substantial increase in traffic. My guess is that you have nothing about which to be concerned. Just sayin'. Fwiw; ymmv.

"I was looking for people that stand behind the products they sell." Indeed.

About two weeks ago I placed an order for 1 tin of JSB pellets. Immediately after the order was placed, I e-mailed this company to add to shipping details.Two days after that I re-e-mailed that same content, seeking to ensure that they had received the updated shipping information. Three days...

"Thank you to all of the sponsors for this one. What a super prize package!" Well said, stoti. 2234.56

A final wrap-up. Hatsan received the Flash QE on October 29. The next day they e-mailed me with the results of their work: they found no issues with it. They state that they used two probes, the one I sent and had been using and one of their own, both of which were used to repeatedly fill the...

As it happens, Hatsan states that they replaced my fill probe (the one that came from PA and which has been used only with the Hill MK4 pump to fill the Flash), and filled the Flash with both it and their replacement one. In neither case were they able to "replicate the issue" that I had...

Hatsan e-mailed me on October 30 with an update and some questions. As it happens, I did not see the e-mail until November 8. (Not Hatsan's fault.) In that e-mail they indicated that they found nothing on the gun itself that would explain the "leak." Also, they suggested that either a...