Search results for query: *

I don't have an m3. But was wondering for those who do, do you still need to dry fire 1-2 shots b4 a hunt? Cause I know mk1 and mk2, the first 1-2 shot will be slower. I don't think it have anything to do with reg creep. It's just how most if not all guns do it. So wondering if the m3 is the...

Selling impact X 600 .25 cal $1400. Sold.

Ok I have a 600mm impact. The 700mm was only $50 more when buying a whole gun but I choose to go with the 600mm cause at the time I wanted a more compact gun. But after watching many YouTubers videos. I only see folks shooting the 700mm. And they are putting hole in hole at 50 and 100 yards...

I remember few years back 600mm was the norm. Then came out with the 700mm and like 90% folks switch over to 700mm. Now it seem some are using 800mm. Is 800mm the new norm? Can't wait for the 900mm and 1000mm. Might as well make a barrel long enough to reach out 50 to 100 yards to your target...

Anyone experience this. Say you set your reg pressure to 140 bar. When the bottle pressure is fill to 250 bar, the reg pressure will be 145 bar. Shoot a couple shot, bottle pressure now at 230-240 bar, reg pressure will be about 143 bar. When bottle pressure gets to 200 bar, reg pressure will be...

I see youtubers are able to get 90ft lb from a .22 impact. I can't even get my .25 impact close. Whats going on. Max i am getting is 80ft lb and no higher. I even installed the slug power kit, huma dual transfer port, huma high pressure reg, power block, 72cc pp, hammer wheel on max, valve past...

I've see there are 2 kits for the 72cc up grade. One kit is about $120 come with power block, valve that connects block to the 72 pp, and the 72 pp. Kit 2, is $220 and comes with all the above, and extra like end cap for the 72 pp, hammer rod, hammer, hammer weight, c1, valve nob, spring. My...

Have anyone compare the old pp on the mk2 vs the new pp on m3? I heard the old pp is like 54cc vs 72cc. How much more speed/power would you get from just upgrading from old pp to new pp and is it worth additional $200? Example if my gun is shooting 970fps with 36gr nsa slug, without changing...

Hello. Anyone have a fx bottle valve rated for 300 bar for sale. Only need the valve, I have a bottle. Message me price if you have one. Thanks.

I have the gen 1 benjamin marauder rifle. I installed the huma reg with guage port hole. I currently have the old marauder 3000 psi guage install and it fit flush with the stock. I am looking to replace it with the huma 25mm round 300 bar guage. My concern is it might be too long and sticking...

Anyone know about npt threads? I thought npt are standard and only 1 type. I purchase one 1/8 male npt and one 1/8 female npt from 2 different sellers. They both said threads are npt. When I got them, they will only screw in 2 turns and get hard and won't turn by hand anymore. Even with a wrench...

Took my compressor high side off to put in new o rings. It was cover in black gunk. I try scrubbing it with a wet towel. I got most off but there are some that just won't come off. What can I use to clean it? Can I use something like break cleaner or wd40? 

I read somewhere that npt seal by the tapered cone shape. The thread crush together to make the seal. I ordered some npt fittings and just wondering do I need to get some Teflon tape too or no?

I see some of the fitting on our hpa fill line are made from brass and some are made from stainless steel. Are they both rated up to 4500 psi? Which is stronger? Or does it matter which type i get for my hpa fittings.

I heard the threads on the tuxing gold filter are m10. Correct me if I'm wrong here. I am trying to find a fitting for it and all I can find is npt this and npt that. Everything is npt thread. Getting so annoying searching hours to find its all in npt threads. After like 3 hours searching I...

Hey guys. I'm trying look for a 90 degrer angle quick disconnect with male side. The only ones I find are straight ones. So my hose would go straight up and loop back down. I wanted to use a angle quick disconnect so my lines doesnt loop up and come back down. Anyone know where I can get some?

Anyone who owns one of the big tuxing gold filter knows they come with the green o rings instead of black. Sometimes when filling up your tanks, the green o ring would get squeeze out from the gap. Even when it doesnt, you open the cap and the o ring is like flaking off or shedding its skins...

I've seen people on YouTube saying they use moisture trap on their compressor over the cotton or desiccant beads. How does a moisture trap work. Idk but I was thinking its just a hollow tube where the moisture and oil collect at the bottom and get purge out? Correct me if I'm wrong. My...

I took off my gold filter on my hatsan compressor. Inside is a cotton filter. I removed it and inside the gold filter there have been rust from oil and moisture. It seem like it's eating away parts of the metal filter. I use a pick to poke inside where the small rust are and its about 1mm deep...

Was able to upload photos few days ago with no problems. But now I can not upload any photo on here. It keep saying it can not be upload for whatever reason. Anyone having this problem?