Search results for query: *

OK so i shoot target pistol at home and have baikal 46m and tau 7. The Tau 7 being co2 makes a hell of a crack, i like the luxury of shooting when i want, 7 am sunday morning and all and of course have neighbours. So i set about making a silencer because this type of gun is shot single handed it...

In the interest of weight reduction i have gone to a two position adjustment, takes about 100 grams from the weight. now adjusted on the hinges.

Thanks for the comments, three pics showing Hamster extended. I would not normally use it extended that much but i suppose it could be used as a rest.

Think its done. So after the first effort i tried to use aluminium for the series of interlocking plates instead of the steel, the upshot is the aluminium binds too much when the pressure is of the joints. So stuck with the steel and a weight of 505 Grams bit of a let down. However i managed to...

Marflow, nice thinking thanks.

So i posted a hamster design recently for the Kral. Have redesigned so that there is a single point of adjustment, a large single wing nut pressures to 12mm bars onto the hinges locking the hole thing in place. I can now adjust rapidly with the rifle still shouldered, and allows individual angle...

Thanks, i am intending to cover the underneath. My main concern was not grip but cold, the aluminium needs covering with thin rubber sheet.

I built an adjustable butt plate for my Kral puncher breaker so needed a hamster for the fore end. I had two criteria, low weight, i managed to keep it under 250 grams and a low profile when fully closed, it closes at 45mm. Its constructed out of aluminium, two 15mm u section have four hollow...

look forward to seeing the pics. im just finishing an adjustable hamster for the same rifle, ill post the pics when its finished. Thanks.

when im trying to build something i try to limit the effort by looking for manufactured components from other subjects that i can take for my design. Good luck.

The rubber butt pad has not been touched its as it came with the gun, the camera mounts needed no work they come drilled and threaded. All that is needed is the 4mm aluminium plate that is up against the stock and the rubber butt. I used the rubber butt as a template drew around it onto the...

Thanks for the comments. its a cheap fix. I live in London uk. The camera mounts come in at 8 pounds sterling for a pack of four, a sheet of aluminium 4mm plate about 10 pounds sterling and some fixings all sourced at amazon. Cant recall the costs of the picatinny rail but i would say i managed...

Made out of picatinny rail with the slots removed + 4 camera mounts and two metal butt plates. originally made in brass but two heavy re made in aluminium. Additional holes have been drilled in the metal butt plate to allow 10mm of horizontal adjustment both right and left. Have one photo below...

nice work, the polishing is a pain i agree. Im thinking of remaking mine in aluminium the weight of the brass is too much. Think ill do it in aluminium ill be using 8mm plate and ill drill multiple holes in the plate to further lighten it. My scope rail was picatinny but because i used camera...

if you make it, would love to see it, please post. Thanks.

found shouldering this rifle a real pain in the neck, had to stoop my neck to get a good sight picture. So i came up with this DIY remedy. Used two camera mounts a filed down scope rail and a couple of brass plates to make an adjustable butt pad. The pad hold rock solid and i now shoot from a...