Search results for query: *

I put a "lesser expensive" on my Predom Lucznik and I always suspected that the sight wouldn't hold zero as they had on my Co2 pistols. I then replaced it with a Holosun and haven't looked back.

JG has a new leather seal if needed. https://www.jgairguns.biz/lp53-c-78_344_347/

The original question is no less difficult than "Who is prettier, your wife or your girlfriend?"

Or there is your own warehouse.

Steveoo, does this look like it will work for the PL?

This is good stuff. It needs to be one of the "sticky" page things.

Noted Steveoo

Steveoo, is a steel top hat more desirable than delrin/nylon/plastic for increased weight?

My PL and I have come to an agreement where I don't take it apart trying to "improve" the latch spring and it stays closed while firing by simply snugging the pivot screw about every 100 shots or so. Hopefully the spring & guide modifications will happen this calendar year.

Thanks Steveoo, the Holosun projects a very round dot and holds adjustment well. I missed your write-up in the rail. Mine is a slightly modified Magpul rail so that I could use the 4.5mm threads, the screws for which are rather rare in the US.

An Intriguing little beast...

I understand that some C600s run with domed pellets, but neither one of my two C600s will. Mine run very well with RWS Meisters or H&N Sport wadcutters. Many pellets are too long for the feed arm and can lead to jamming. A loose/worn cam ring may cause a jam, but I haven't been able to...

I came across this a couple years ago, but I have no experience with it (or any barrel weight) https://limbsaver.com/products/sharpshooter-x-ring-barrel-dampener

OP, that is a very nice C600. I don't believe that serial number are an accurate means to to date a 600, but I could be wrong. There were three variations and the first & perhaps second had the "short stroke" safety slot and corresponding notch in the grips. The third variant, and perhaps...

Here are some helpful links in this thread: https://www.airgunnation.com/threads/advice-on-crosman-600.910698/

Is there a chance that it is still under pressure from a Co2 cartridge? My 600's hold gas for a couple months at a time. The entire pressure boundary is in the tube - cap seal, valve and valve body o-ring. If the hammer is removed you might tap the valve to see if it is under pressure...

Yes, my PL is my most challenging pistol to shoot well. Mine is very accurate if I do my part. Many are reported to have nails, screws, etc. imbedded in the piston face from early abuse as a training pistol. Mine had a piece of a wood screw in it.

I suspect that they are medical oxygen cylinders. The valves are very similar to the valves seen on portable oxygen cylinders today. Another indicator of oxygen service is the "use no oil" line on the dial. High pressure oxygen combined with any hydrocarbon can create alot of friction and...

I also have a PL and it is very enjoyable. I have reduced the transfer port with brass tubing per Stevoos instructions, but have yet to fabricated a new spring and top hat. It isn't fair to the PL to call it a Walther copy. While it is the same concept, no part would even come close to...

Thanks for the explanation. Looks like a really cool idea.